Add lane index and HSIO configuration definitions of the i.MX8Q HSIO SerDes PHY into header file. Signed-off-by: Richard Zhu <hongxing.zhu@xxxxxxx> Reviewed-by: Frank Li <Frank.Li@xxxxxxx> --- include/dt-bindings/phy/phy-imx8-pcie.h | 62 +++++++++++++++++++++++++ 1 file changed, 62 insertions(+) diff --git a/include/dt-bindings/phy/phy-imx8-pcie.h b/include/dt-bindings/phy/phy-imx8-pcie.h index 8bbe2d6538d8..60447b95a952 100644 --- a/include/dt-bindings/phy/phy-imx8-pcie.h +++ b/include/dt-bindings/phy/phy-imx8-pcie.h @@ -11,4 +11,66 @@ #define IMX8_PCIE_REFCLK_PAD_INPUT 1 #define IMX8_PCIE_REFCLK_PAD_OUTPUT 2 +/* + * i.MX8QM HSIO subsystem has three lane PHYs and three controllers: + * PCIEA(2 lanes capable PCIe controller), PCIEB (only support one + * lane) and SATA. + * + * Meanwhile, i.MX8QXP HSIO subsystem has one lane PHY and PCIEB(only + * support one lane) controller. + * + * In the different use cases. PCIEA can be bound to PHY lane0, lane1 + * or Lane0 and lane1. PCIEB can be bound to lane1 or lane2 PHY. SATA + * can only be bound to last lane2 PHY. + * + * +-------------------------------+------------------+ + * | i.MX8QM | i.MX8QXP | + * |-------------------------------|------------------| + * | | PCIEA | PCIEB | SATA | | PCIEB | + * |-------------------------------|-------|----------| + * | LAN 0 | X | | | LAN 0 | * | + * |-------------------------------|-------|----------| + * | LAN 1 | X | * | | | | + * |-------------------------------|-------|----------| + * | LAN 2 | | * | * | | | + * +-------------------------------+------------------+ + * NOTE: + * *: Choose one only. + * X: Choose any of these. + * + * Define i.MX8Q HSIO PHY lane index here to specify the lane mask. + */ +#define IMX8Q_HSIO_LANE0 0x1 +#define IMX8Q_HSIO_LANE1 0x2 +#define IMX8Q_HSIO_LANE2 0x4 + +/* + * Regarding the design of i.MX8QM HSIO subsystem, HSIO module can be + * confiured as following three use cases. + * + * Define different configurations refer to the use cases, since it is + * mandatory required in the initialization. + * + * On i.MX8QXP, HSIO module only has PCIEB and one lane PHY. + * Define "IMX8Q_HSIO_CFG_PCIEB" for i.MX8QXP platforms. + * + * +----------------------------------------------------+----------+ + * | | i.MX8QM | i.MX8QXP | + * |-------------------------------|--------------------|----------| + * | | LAN0 | LAN1 | LAN2 | LAN0 | + * |-------------------------------|------|------|------|----------| + * | IMX8Q_HSIO_CFG_PCIEAX2SATA | PCIEA| PCIEA| SATA | | + * |-------------------------------|------|------|------|----------| + * | IMX8Q_HSIO_CFG_PCIEAX2PCIEB | PCIEA| PCIEA| PCIEB| | + * |-------------------------------|------|------|------|----------| + * | IMX8Q_HSIO_CFG_PCIEAPCIEBSATA | PCIEA| PCIEB| SATA | | + * |-------------------------------|------|------|------|----------| + * | IMX8Q_HSIO_CFG_PCIEB | - | - | - | PCIEB | + * +----------------------------------------------------+----------+ + */ +#define IMX8Q_HSIO_CFG_PCIEAX2SATA 0x1 +#define IMX8Q_HSIO_CFG_PCIEAX2PCIEB 0x2 +#define IMX8Q_HSIO_CFG_PCIEAPCIEBSATA (IMX8Q_HSIO_CFG_PCIEAX2SATA | IMX8Q_HSIO_CFG_PCIEAX2PCIEB) +#define IMX8Q_HSIO_CFG_PCIEB IMX8Q_HSIO_CFG_PCIEAX2PCIEB + #endif /* _DT_BINDINGS_IMX8_PCIE_H */ -- 2.37.1
