On 15.04.2024 10:57, Krzysztof Kozlowski wrote:
On 14/04/2024 22:21, Arınç ÜNAL wrote:
NVRAM is described as both flash device partition and memory mapped NVMEM.
This platform stores NVRAM on flash but makes it also memory accessible.
As device partitions are described in board DTS, the nvram node must also
Sorry, but we do not talk about partitions. Partitions are indeed board
property. But the piece of hardware, so NVMEM, is provided by SoC.
be defined there as its address and size will be different by board. It has
been widely described on at least bcm4709 and bcm47094 SoC board DTS files
here.
These not proper arguments. What you are saying here is that SoC does no
have nvram at address 0x1c08000. Instead you are saying there some sort
of bus going out of SoC to the board and on the board physically there
is some NVRAM sort of memory attached to this bus.
Yes that is the case. NVRAM is stored on a partition on the flash. On the
Broadcom NorthStar platform, the NAND flash base is 0x1c000000, the NOR
flash base is 0x1e000000.
For the board in this patch, the flash is a NAND flash. The NVRAM partition
starts at address 0x00080000. Therefore, the NVRAM component's address is
0x1c080000.
2. You cannot have MMIO node outside of soc. That's a W=1 warning.
I was not able to spot a warning related to this with the command below.
The source code directory is checked out on a recent soc/soc.git for-next
tree. Please let me know the correct command to do this.
$ make W=1 dtbs
[...]
DTC arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dtb
arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0.dtsi:10.18-19.5: Warning (avoid_unnecessary_addr_size): /nand-controller@18028000/nand@0: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
also defined at arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0-bch8.dtsi:13.9-17.3
also defined at arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts:137.9-160.3
arch/arm/boot/dts/broadcom/bcm-ns.dtsi:24.28-47.4: Warning (unique_unit_address_if_enabled): /chipcommon-a-bus@18000000: duplicate unit-address (also used in node /axi@18000000)
arch/arm/boot/dts/broadcom/bcm-ns.dtsi:323.22-328.4: Warning (unique_unit_address_if_enabled): /mdio@18003000: duplicate unit-address (also used in node /mdio-mux@18003000)
Hm, indeed, that way it works. Actually should work if we allow soc@0
and memory@x, obviously.
I was a bit confused with memory@x too.
Anyway, it is outside of soc node and soc dtsi, which leads to previous
point - you claim that it is not physically in the SoC package. How is
it connected? If it is on the board, why does it have brcm compatible,
not some "ti,whatever-eeprom-nvram"?
I don't know what to tell you. I don't know this set of SoCs' dt-bindings.
I am merely submitting a board device tree source file. It would be great
if this didn't block this patch series and this conversation was further
discussed with Rafal who maintains this set of SoCs' dt-bindings, from what
I remember.
Arınç
