From: Arınç ÜNAL <arinc.unal@xxxxxxxxxx> Add the device tree for ASUS RT-AC3200 which is an AC3200 router featuring 5 Ethernet ports over the integrated Broadcom switch. Hardware info: * Processor: Broadcom BCM4709A0 dual-core @ 1.0 GHz * Switch: BCM53012 in BCM4709A0 * DDR3 RAM: 256 MB * Flash: 128 MB * 2.4GHz: BCM43602 3x3 single chip 802.11b/g/n SoC * 5GHz: BCM43602 3x3 two chips 802.11a/n/ac SoC * Ports: 4 LAN Ports, 1 WAN Port Co-developed-by: Tom Brautaset <tbrautaset@xxxxxxxxx> Signed-off-by: Tom Brautaset <tbrautaset@xxxxxxxxx> Signed-off-by: Arınç ÜNAL <arinc.unal@xxxxxxxxxx> --- arch/arm/boot/dts/broadcom/Makefile | 1 + .../boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts | 164 +++++++++++++++++++++ 2 files changed, 165 insertions(+) diff --git a/arch/arm/boot/dts/broadcom/Makefile b/arch/arm/boot/dts/broadcom/Makefile index 7099d9560033..c61fca514775 100644 --- a/arch/arm/boot/dts/broadcom/Makefile +++ b/arch/arm/boot/dts/broadcom/Makefile @@ -64,6 +64,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm47081-luxul-xap-1410.dtb \ bcm47081-luxul-xwr-1200.dtb \ bcm47081-tplink-archer-c5-v2.dtb \ + bcm4709-asus-rt-ac3200.dtb \ bcm4709-asus-rt-ac87u.dtb \ bcm4709-buffalo-wxr-1900dhp.dtb \ bcm4709-linksys-ea9200.dtb \ diff --git a/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts b/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts new file mode 100644 index 000000000000..8640dda211ae --- /dev/null +++ b/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts @@ -0,0 +1,164 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Author: Tom Brautaset <tbrautaset@xxxxxxxxx> + */ + +/dts-v1/; + +#include "bcm4709.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +#include <dt-bindings/leds/common.h> + +/ { + compatible = "asus,rt-ac3200", "brcm,bcm4709", "brcm,bcm4708"; + model = "ASUS RT-AC3200"; + + chosen { + bootargs = "console=ttyS0,115200 earlycon"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; + }; + + nvram@1c080000 { + compatible = "brcm,nvram"; + reg = <0x1c080000 0x00180000>; + + et0macaddr: et0macaddr { + #nvmem-cell-cells = <1>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-power { + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_POWER; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + led-wan-red { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_WAN; + gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; + }; + + led-wps { + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_WPS; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-reset { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + + button-wifi { + label = "Wi-Fi"; + linux,code = <KEY_RFKILL>; + gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; + }; + + button-wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&usb2 { + vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; +}; + +&usb3_phy { + status = "okay"; +}; + +&gmac0 { + nvmem-cells = <&et0macaddr 0>; + nvmem-cell-names = "mac-address"; +}; + +&gmac1 { + nvmem-cells = <&et0macaddr 1>; + nvmem-cell-names = "mac-address"; +}; + +&gmac2 { + nvmem-cells = <&et0macaddr 2>; + nvmem-cell-names = "mac-address"; +}; + +&srab { + status = "okay"; + + ports { + port@0 { + label = "wan"; + nvmem-cells = <&et0macaddr 0>; + nvmem-cell-names = "mac-address"; + }; + + port@1 { + label = "lan1"; + nvmem-cells = <&et0macaddr 1>; + nvmem-cell-names = "mac-address"; + }; + + port@2 { + label = "lan2"; + nvmem-cells = <&et0macaddr 2>; + nvmem-cell-names = "mac-address"; + }; + + port@3 { + label = "lan3"; + nvmem-cells = <&et0macaddr 3>; + nvmem-cell-names = "mac-address"; + }; + + port@4 { + label = "lan4"; + nvmem-cells = <&et0macaddr 4>; + nvmem-cell-names = "mac-address"; + }; + }; +}; + +&nandcs { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x00080000>; + read-only; + }; + + partition@80000 { + label = "nvram"; + reg = <0x00080000 0x00180000>; + }; + + partition@200000 { + label = "firmware"; + reg = <0x00200000 0x07e00000>; + compatible = "brcm,trx"; + }; + }; +}; -- 2.40.1