Re: [PATCH 3/4] ARM: dts: BCM5301X: Add DT for ASUS RT-AC3200

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 14.04.2024 22:12, Krzysztof Kozlowski wrote:
On 14/04/2024 18:59, Arınç ÜNAL wrote:
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	nvram@1c080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1c080000 0x00180000>;

Why is this outside of soc? Both soc node and soc DTSI?

I don't maintain the SoC device tree files so I don't know. The nvram node
doesn't exist on any of the device tree files included by this device tree.

There are two problems here:
1. This looks like SoC component and such should not be in board DTS.
Regardless whether you maintain something or not, you should not add
incorrect code. Unless this is correct code, but then please share some
details.

NVRAM is described as both flash device partition and memory mapped NVMEM.
This platform stores NVRAM on flash but makes it also memory accessible.

As device partitions are described in board DTS, the nvram node must also
be defined there as its address and size will be different by board. It has
been widely described on at least bcm4709 and bcm47094 SoC board DTS files
here.


2. You cannot have MMIO node outside of soc. That's a W=1 warning.

I was not able to spot a warning related to this with the command below.
The source code directory is checked out on a recent soc/soc.git for-next
tree. Please let me know the correct command to do this.

$ make W=1 dtbs
[...]
  DTC     arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dtb
arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0.dtsi:10.18-19.5: Warning (avoid_unnecessary_addr_size): /nand-controller@18028000/nand@0: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
  also defined at arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0-bch8.dtsi:13.9-17.3
  also defined at arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts:137.9-160.3
arch/arm/boot/dts/broadcom/bcm-ns.dtsi:24.28-47.4: Warning (unique_unit_address_if_enabled): /chipcommon-a-bus@18000000: duplicate unit-address (also used in node /axi@18000000)
arch/arm/boot/dts/broadcom/bcm-ns.dtsi:323.22-328.4: Warning (unique_unit_address_if_enabled): /mdio@18003000: duplicate unit-address (also used in node /mdio-mux@18003000)

Arınç




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux