Hello, On Tue, Apr 02, 2024 at 09:52:06PM +0200, Stefan Wahren wrote: > Am 02.04.24 um 10:58 schrieb Ivan T. Ivanov: > > On 2024-03-28 01:37, Laurent Pinchart wrote: > >> On Wed, Mar 27, 2024 at 07:49:38AM +0100, Stefan Wahren wrote: > >>> Hi, > >>> > >>> [add Peter and Ivan] > >>> > >>> Am 26.03.24 um 20:58 schrieb Laurent Pinchart: > >>> > Hello, > >>> > > >>> > This small series includes a few drive-by fixes for DT validation > >>> > errors. > >>> > > >>> > The first patch has been posted previously in v1 ([1], and now addresses > >>> > a small review comment. I think it's good to go. > >>> > > >>> > The next two patches address the same issue as "[PATCH 1/2] dt-bindings: > >>> > arm: bcm: raspberrypi,bcm2835-firmware: Add missing properties" ([2]), > >>> > but this time with a (hopefully) correct approach. Patch 2/3 starts by > >>> > fixing the raspberrypi-bcm2835-firmware driver, removing the need for DT > >>> > properties that are specified in bcm2835-rpi.dtsi but not documented in > >>> > the corresponding bindings. Patch 3/3 can then drop those properties, > >>> > getting rid of the warnings. > >>> > >>> since this series drops properties from the device tree, does anyone > >>> have the chance to test it with a recent U-Boot? > >> > >> I don't have U-Boot running with my RPi, so I would appreciate if > >> someone could help :-) > > > > Sorry for taking me so long to verify this. > > > > I think on RPi U-Boot side we are fine. API used when accessing Mbox > > device do not follow DM model and do not use DMA, but just access > > device directly using this nice macros phys_to_bus/bus_to_phys. > > > > I build new DTB files with this patch included and U-Boot build > > from the latest sources. No obvious issues on RPi3 and RPi4. > > Devices boot fine. Thank you for testing Ivan. > Thanks you, Laurent and Ivan > > Reviewed-by: Stefan Wahren <wahrenst@xxxxxxx> Stefan, I'm quite unfamiliar with the Raspberry Pi upstreaming process (despite having sent patches for ages :-)), do I understand correctly that this patch will go through your tree, or do I need to work with someone else to get it merged upstream ? -- Regards, Laurent Pinchart