On Wed, Mar 27, 2024 at 07:49:38AM +0100, Stefan Wahren wrote: > Hi, > > [add Peter and Ivan] > > Am 26.03.24 um 20:58 schrieb Laurent Pinchart: > > Hello, > > > > This small series includes a few drive-by fixes for DT validation > > errors. > > > > The first patch has been posted previously in v1 ([1], and now addresses > > a small review comment. I think it's good to go. > > > > The next two patches address the same issue as "[PATCH 1/2] dt-bindings: > > arm: bcm: raspberrypi,bcm2835-firmware: Add missing properties" ([2]), > > but this time with a (hopefully) correct approach. Patch 2/3 starts by > > fixing the raspberrypi-bcm2835-firmware driver, removing the need for DT > > properties that are specified in bcm2835-rpi.dtsi but not documented in > > the corresponding bindings. Patch 3/3 can then drop those properties, > > getting rid of the warnings. > > since this series drops properties from the device tree, does anyone > have the chance to test it with a recent U-Boot? I don't have U-Boot running with my RPi, so I would appreciate if someone could help :-) > > [1] https://lore.kernel.org/linux-arm-kernel/20240326004902.17054-3-laurent.pinchart@xxxxxxxxxxxxxxxx/ > > [2] https://lore.kernel.org/linux-arm-kernel/20240326004902.17054-2-laurent.pinchart@xxxxxxxxxxxxxxxx/ > > > > Laurent Pinchart (3): > > dt-bindings: arm: bcm: raspberrypi,bcm2835-firmware: Add gpio child > > node > > firmware: raspberrypi: Use correct device for DMA mappings > > ARM: dts: bcm283x: Drop unneeded properties in the bcm2835-firmware > > node > > > > .../arm/bcm/raspberrypi,bcm2835-firmware.yaml | 30 +++++++++++++++++++ > > .../gpio/raspberrypi,firmware-gpio.txt | 30 ------------------- > > arch/arm/boot/dts/broadcom/bcm2835-rpi.dtsi | 4 --- > > drivers/firmware/raspberrypi.c | 7 +++-- > > 4 files changed, 34 insertions(+), 37 deletions(-) > > delete mode 100644 Documentation/devicetree/bindings/gpio/raspberrypi,firmware-gpio.txt > > -- Regards, Laurent Pinchart