Re: [PATCH 1/2] dt-bindings: phy: mediatek,xfi-tphy: add new bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 01/02/2024 22:52, Daniel Golle wrote:
> Add bindings for the MediaTek XFI T-PHY Ethernet SerDes PHY found in the
> MediaTek MT7988 SoC which can operate at various interfaces modes:
> 
> via USXGMII PCS:
>  * USXGMII
>  * 10GBase-R
>  * 5GBase-R
> 
> via LynxI SGMII PCS:
>  * 2500Base-X
>  * 1000Base-X
>  * Cisco SGMII (MAC side)
> 
> Signed-off-by: Daniel Golle <daniel@xxxxxxxxxxxxxx>
> ---
>  .../bindings/phy/mediatek,xfi-tphy.yaml       | 80 +++++++++++++++++++
>  1 file changed, 80 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/mediatek,xfi-tphy.yaml
> 
> diff --git a/Documentation/devicetree/bindings/phy/mediatek,xfi-tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,xfi-tphy.yaml
> new file mode 100644
> index 0000000000000..e897118dcf7e6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/mediatek,xfi-tphy.yaml
> @@ -0,0 +1,80 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/mediatek,xfi-tphy.yaml#

Please use compatible as filename. Your binding says only one is
possible (const, not enum), so there is no reasoning for different filename.

> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MediaTek XFI T-PHY
> +
> +maintainers:
> +  - Daniel Golle <daniel@xxxxxxxxxxxxxx>
> +
> +description:
> +  The MediaTek XFI SerDes T-PHY provides the physical SerDes lanes
> +  used by the (10G/5G) USXGMII PCS and (1G/2.5G) LynxI PCS found in
> +  MediaTek's 10G-capabale SoCs.
> +
> +properties:
> +  $nodename:
> +    pattern: "^phy@[0-9a-f]+$"

No need for nodename in individual bindings file.

> +
> +  compatible:
> +    const: mediatek,mt7988-xfi-tphy
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: XFI PHY clock
> +      - description: XFI register clock
> +
> +  clock-names:
> +    items:
> +      - const: xfipll
> +      - const: topxtal
> +
> +  resets:
> +    items:
> +      - description: PEXTP reset
> +
> +  mediatek,usxgmii-performance-errata:
> +    $ref: /schemas/types.yaml#/definitions/flag
> +    description:
> +      One instance of the T-PHY on MT7988 suffers from a performance
> +      problem in 10GBase-R mode which needs a work-around in the driver.

Can you explain what is this issue and errata about (except performance)?

> +      The work-around is enabled using this flag.
> +
> +  "#phy-cells":
> +    const: 0
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - resets
> +  - "#phy-cells"
> +
> +additionalProperties: false


Best regards,
Krzysztof





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux