On 01/23/2015 04:16 PM, Krzysztof Kozlowski wrote:
> On pią, 2015-01-23 at 15:41 +0900, Beomho Seo wrote:
>> On 01/23/2015 03:32 PM, Krzysztof Kozlowski wrote:
>>> 2015-01-23 6:02 GMT+01:00 Jaewon Kim <jaewon02.kim@xxxxxxxxxxx>:
>>>> This patch adds MAX77843 core/irq driver to support PMIC,
>>>> MUIC(Micro USB Interface Controller), Charger, Fuel Gauge,
>>>> LED and Haptic device.
>>>>
>>>> Cc: Lee Jones <lee.jones@xxxxxxxxxx>
>>>> Signed-off-by: Beomho Seo <beomho.seo@xxxxxxxxxxx>
>>>> Signed-off-by: Jaewon Kim <jaewon02.kim@xxxxxxxxxxx>
>>>> ---
>>>> drivers/mfd/Kconfig | 14 ++
>>>> drivers/mfd/Makefile | 1 +
>>>> drivers/mfd/max77843.c | 241 ++++++++++++++++++++
>>>> include/linux/mfd/max77843-private.h | 410 ++++++++++++++++++++++++++++++++++
>>>> 4 files changed, 666 insertions(+)
>>>> create mode 100644 drivers/mfd/max77843.c
>>>> create mode 100644 include/linux/mfd/max77843-private.h
>>>>
>>>> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
>>>> index 2e6b731..0c67c79 100644
>>>> --- a/drivers/mfd/Kconfig
>>>> +++ b/drivers/mfd/Kconfig
>>>> @@ -442,6 +442,20 @@ config MFD_MAX77693
>>>> additional drivers must be enabled in order to use the functionality
>>>> of the device.
>>>>
>>>> +config MFD_MAX77843
>>>> + bool "Maxim Semiconductor MAX77843 PMIC Support"
>>>> + depends on I2C=y
>>>> + select MFD_CORE
>>>> + select REGMAP_I2C
>>>> + select REGMAP_IRQ
>>>> + help
>>>> + Say yes here to add support for Maxim Semiconductor MAX77843.
>>>> + This is companion Power Management IC with LEDs, Haptic, Charger,
>>>> + Fuel Gauge, MUIC(Micro USB Interface Controller) controls on chip.
>>>> + This driver provides common support for accessing the device;
>>>> + additional drivers must be enabled in order to use the functionality
>>>> + of the device.
>>>> +
>>>> config MFD_MAX8907
>>>> tristate "Maxim Semiconductor MAX8907 PMIC Support"
>>>> select MFD_CORE
>>>> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
>>>> index 53467e2..fe4f75c 100644
>>>> --- a/drivers/mfd/Makefile
>>>> +++ b/drivers/mfd/Makefile
>>>> @@ -117,6 +117,7 @@ obj-$(CONFIG_MFD_DA9063) += da9063.o
>>>> obj-$(CONFIG_MFD_MAX14577) += max14577.o
>>>> obj-$(CONFIG_MFD_MAX77686) += max77686.o
>>>> obj-$(CONFIG_MFD_MAX77693) += max77693.o
>>>> +obj-$(CONFIG_MFD_MAX77843) += max77843.o
>>>> obj-$(CONFIG_MFD_MAX8907) += max8907.o
>>>> max8925-objs := max8925-core.o max8925-i2c.o
>>>> obj-$(CONFIG_MFD_MAX8925) += max8925.o
>>>> diff --git a/drivers/mfd/max77843.c b/drivers/mfd/max77843.c
>>>> new file mode 100644
>>>> index 0000000..d7f8b76
>>>> --- /dev/null
>>>> +++ b/drivers/mfd/max77843.c
>>>> @@ -0,0 +1,241 @@
>>>> +/*
>>>> + * max77843.c - MFD core driver for the Maxim MAX77843
>>>> + *
>>>> + * Copyright (C) 2014 Samsung Electrnoics
>>>> + * Author: Jaewon Kim <jaewon02.kim@xxxxxxxxxxx>
>>>> + *
>>>> + * This program is free software; you can redistribute it and/or modify
>>>> + * it under the terms of the GNU General Public License as published by
>>>> + * the Free Software Foundation; either version 2 of the License, or
>>>> + * (at your option) any later version.
>>>> + */
>>>> +
>>>> +#include <linux/err.h>
>>>> +#include <linux/i2c.h>
>>>> +#include <linux/init.h>
>>>> +#include <linux/interrupt.h>
>>>> +#include <linux/module.h>
>>>> +#include <linux/mfd/core.h>
>>>> +#include <linux/mfd/max77843-private.h>
>>>> +#include <linux/of_device.h>
>>>> +#include <linux/platform_device.h>
>>>> +
>>>> +static const struct mfd_cell max77843_devs[] = {
>>>> + {
>>>> + .name = "max77843-muic",
>>>> + .of_compatible = "maxim,max77843-muic",
>>>> + }, {
>>>> + .name = "max77843-regulator",
>>>> + .of_compatible = "maxim,max77843-regulator",
>>>> + }, {
>>>> + .name = "max77843-charger",
>>>> + .of_compatible = "maxim,max77843-charger"
>>>> + }, {
>>>> + .name = "max77843-fuelgauge",
>>>> + .of_compatible = "maxim,max77843-fuelgauge",
>>>> + },
>>>> +};
>>>> +
>>>> +static const struct regmap_config max77843_charger_regmap_config = {
>>>> + .reg_bits = 8,
>>>> + .val_bits = 8,
>>>> + .max_register = MAX77843_CHG_REG_END,
>>>> +};
>>>> +
>>>> +static const struct regmap_config max77843_regmap_config = {
>>>> + .reg_bits = 8,
>>>> + .val_bits = 8,
>>>> + .max_register = MAX77843_SYS_REG_END,
>>>> +};
>>>> +
>>>> +static const struct regmap_irq max77843_irqs[] = {
>>>> + /* TOPSYS interrupts */
>>>> + { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_SYSUVLO_INT, },
>>>> + { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_SYSOVLO_INT, },
>>>> + { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_TSHDN_INT, },
>>>> + { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_TM_INT, },
>>>> +};
>>>> +
>>>> +static const struct regmap_irq_chip max77843_irq_chip = {
>>>> + .name = "max77843",
>>>> + .status_base = MAX77843_SYS_REG_SYSINTSRC,
>>>> + .mask_base = MAX77843_SYS_REG_SYSINTMASK,
>>>> + .mask_invert = false,
>>>> + .num_regs = 1,
>>>> + .irqs = max77843_irqs,
>>>> + .num_irqs = ARRAY_SIZE(max77843_irqs),
>>>> +};
>>>> +
>>>> +static int max77843_chg_init(struct max77843 *max77843)
>>>> +{
>>>
>>> Could this function be moved to the charger driver? This way the
>>> driver will manage its own resources instead of depending on parent
>>> MFD driver.
>>>
>>
>> Charger regulator and Charger share same resources.
>> So I include this function core driver.
>
> OK, I see... Could you describe it in comments somewhere? For example in
> comment above the function. Currently this looks like only as regmap for
> charger.
>
Charger regulator and Charger use same regmap.
> Unfortunately current solution imposes problem with releasing resources.
> Who is the owner of i2c dummy device?
>
Core driver owner of i2c dummy device.
> 1. The charger driver will unregister it if max77843_charger_probe()
> fails. What will happen with regulator driver in such case?
>
Charger is enabled/disabled by Charger regulator.
Currently, If charger probe fails, charger regulator failed to read regmap and occur panic(It have to fix.)
> 2. Who will release this i2c dummy device in normal unbind? Currently it
> leaks.
>
I think core driver release i2c dummy device in normal unbind.
We need to more discussion about this problem.
If you have any idea, I hope tell me. Again, Thank you for your advice.
Thanks,
Beomho Seo
> Best regards,
> Krzysztof
>
>>
>>>> + int ret;
>>>> +
>>>> + max77843->i2c_chg = i2c_new_dummy(max77843->i2c->adapter, I2C_ADDR_CHG);
>>>> + if (!max77843->i2c_chg) {
>>>> + dev_err(&max77843->i2c->dev,
>>>> + "Cannot allocate I2C device for Charger\n");
>>>> + return PTR_ERR(max77843->i2c_chg);
>>>> + }
>>>> + i2c_set_clientdata(max77843->i2c_chg, max77843);
>>>> +
>>>> + max77843->regmap_chg = devm_regmap_init_i2c(max77843->i2c_chg,
>>>> + &max77843_charger_regmap_config);
>>>> + if (IS_ERR(max77843->regmap_chg)) {
>>>> + ret = PTR_ERR(max77843->regmap_chg);
>>>> + goto err_chg_i2c;
>>>> + }
>>>> +
>>>> + return 0;
>>>> +
>>>> +err_chg_i2c:
>>>> + i2c_unregister_device(max77843->i2c_chg);
>>>> +
>>>> + return ret;
>>>> +}
>>>> +
>>>> +static int max77843_probe(struct i2c_client *i2c,
>>>> + const struct i2c_device_id *id)
>>>> +{
>>>> + struct max77843 *max77843;
>>>> + int ret;
>>>> + unsigned int reg_data;
>>>> +
>>>> + max77843 = devm_kzalloc(&i2c->dev, sizeof(*max77843), GFP_KERNEL);
>>>> + if (!max77843)
>>>> + return -ENOMEM;
>>>> +
>>>> + i2c_set_clientdata(i2c, max77843);
>>>> + max77843->dev = &i2c->dev;
>>>> + max77843->i2c = i2c;
>>>> + max77843->irq = i2c->irq;
>>>> +
>>>> + max77843->regmap = devm_regmap_init_i2c(i2c,
>>>> + &max77843_regmap_config);
>>>> + if (IS_ERR(max77843->regmap)) {
>>>> + dev_err(&i2c->dev, "Failed to allocate topsys register map\n");
>>>> + return PTR_ERR(max77843->regmap);
>>>> + }
>>>> +
>>>> + ret = regmap_add_irq_chip(max77843->regmap, max77843->irq,
>>>> + IRQF_TRIGGER_LOW | IRQF_ONESHOT | IRQF_SHARED,
>>>> + 0, &max77843_irq_chip, &max77843->irq_data);
>>>
>>> Why shared IRQ?
>>>
>>>> + if (ret) {
>>>> + dev_err(&i2c->dev, "Failed to add TOPSYS IRQ chip\n");
>>>> + return ret;
>>>> + }
>>>> +
>>>> + ret = regmap_read(max77843->regmap,
>>>> + MAX77843_SYS_REG_PMICID, ®_data);
>>>> + if (ret < 0) {
>>>> + dev_err(&i2c->dev, "Failed to read PMIC ID\n");
>>>> + goto err_pmic_id;
>>>> + }
>>>> + dev_info(&i2c->dev, "device ID: 0x%x\n", reg_data);
>>>> +
>>>> + ret = max77843_chg_init(max77843);
>>>> + if (ret) {
>>>> + dev_err(&i2c->dev, "Failed to init Charger\n");
>>>> + goto err_pmic_id;
>>>> + }
>>>> +
>>>> + ret = regmap_update_bits(max77843->regmap,
>>>> + MAX77843_SYS_REG_INTSRCMASK,
>>>> + MAX77843_INTSRC_MASK_MASK,
>>>> + (unsigned int)~MAX77843_INTSRC_MASK_MASK);
>>>> + if (ret < 0) {
>>>> + dev_err(&i2c->dev, "Failed to unmask interrupt sourece\n");
>>>
>>> s/sourece/source/
>>>
>>> Best regards,
>>> Krzysztof
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe linux-pm" in
>>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pm" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
