On pią, 2015-01-23 at 20:10 +0900, Beomho Seo wrote:
> On 01/23/2015 04:16 PM, Krzysztof Kozlowski wrote:
> > On pią, 2015-01-23 at 15:41 +0900, Beomho Seo wrote:
> >> On 01/23/2015 03:32 PM, Krzysztof Kozlowski wrote:
> >>> 2015-01-23 6:02 GMT+01:00 Jaewon Kim <jaewon02.kim@xxxxxxxxxxx>:
> >>>> This patch adds MAX77843 core/irq driver to support PMIC,
> >>>> MUIC(Micro USB Interface Controller), Charger, Fuel Gauge,
> >>>> LED and Haptic device.
> >>>>
> >>>> Cc: Lee Jones <lee.jones@xxxxxxxxxx>
> >>>> Signed-off-by: Beomho Seo <beomho.seo@xxxxxxxxxxx>
> >>>> Signed-off-by: Jaewon Kim <jaewon02.kim@xxxxxxxxxxx>
> >>>> ---
> >>>> drivers/mfd/Kconfig | 14 ++
> >>>> drivers/mfd/Makefile | 1 +
> >>>> drivers/mfd/max77843.c | 241 ++++++++++++++++++++
> >>>> include/linux/mfd/max77843-private.h | 410 ++++++++++++++++++++++++++++++++++
> >>>> 4 files changed, 666 insertions(+)
> >>>> create mode 100644 drivers/mfd/max77843.c
> >>>> create mode 100644 include/linux/mfd/max77843-private.h
> >>>>
> >>>> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> >>>> index 2e6b731..0c67c79 100644
> >>>> --- a/drivers/mfd/Kconfig
> >>>> +++ b/drivers/mfd/Kconfig
> >>>> @@ -442,6 +442,20 @@ config MFD_MAX77693
> >>>> additional drivers must be enabled in order to use the functionality
> >>>> of the device.
> >>>>
> >>>> +config MFD_MAX77843
> >>>> + bool "Maxim Semiconductor MAX77843 PMIC Support"
> >>>> + depends on I2C=y
> >>>> + select MFD_CORE
> >>>> + select REGMAP_I2C
> >>>> + select REGMAP_IRQ
> >>>> + help
> >>>> + Say yes here to add support for Maxim Semiconductor MAX77843.
> >>>> + This is companion Power Management IC with LEDs, Haptic, Charger,
> >>>> + Fuel Gauge, MUIC(Micro USB Interface Controller) controls on chip.
> >>>> + This driver provides common support for accessing the device;
> >>>> + additional drivers must be enabled in order to use the functionality
> >>>> + of the device.
> >>>> +
> >>>> config MFD_MAX8907
> >>>> tristate "Maxim Semiconductor MAX8907 PMIC Support"
> >>>> select MFD_CORE
> >>>> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> >>>> index 53467e2..fe4f75c 100644
> >>>> --- a/drivers/mfd/Makefile
> >>>> +++ b/drivers/mfd/Makefile
> >>>> @@ -117,6 +117,7 @@ obj-$(CONFIG_MFD_DA9063) += da9063.o
> >>>> obj-$(CONFIG_MFD_MAX14577) += max14577.o
> >>>> obj-$(CONFIG_MFD_MAX77686) += max77686.o
> >>>> obj-$(CONFIG_MFD_MAX77693) += max77693.o
> >>>> +obj-$(CONFIG_MFD_MAX77843) += max77843.o
> >>>> obj-$(CONFIG_MFD_MAX8907) += max8907.o
> >>>> max8925-objs := max8925-core.o max8925-i2c.o
> >>>> obj-$(CONFIG_MFD_MAX8925) += max8925.o
> >>>> diff --git a/drivers/mfd/max77843.c b/drivers/mfd/max77843.c
> >>>> new file mode 100644
> >>>> index 0000000..d7f8b76
> >>>> --- /dev/null
> >>>> +++ b/drivers/mfd/max77843.c
> >>>> @@ -0,0 +1,241 @@
> >>>> +/*
> >>>> + * max77843.c - MFD core driver for the Maxim MAX77843
> >>>> + *
> >>>> + * Copyright (C) 2014 Samsung Electrnoics
> >>>> + * Author: Jaewon Kim <jaewon02.kim@xxxxxxxxxxx>
> >>>> + *
> >>>> + * This program is free software; you can redistribute it and/or modify
> >>>> + * it under the terms of the GNU General Public License as published by
> >>>> + * the Free Software Foundation; either version 2 of the License, or
> >>>> + * (at your option) any later version.
> >>>> + */
> >>>> +
> >>>> +#include <linux/err.h>
> >>>> +#include <linux/i2c.h>
> >>>> +#include <linux/init.h>
> >>>> +#include <linux/interrupt.h>
> >>>> +#include <linux/module.h>
> >>>> +#include <linux/mfd/core.h>
> >>>> +#include <linux/mfd/max77843-private.h>
> >>>> +#include <linux/of_device.h>
> >>>> +#include <linux/platform_device.h>
> >>>> +
> >>>> +static const struct mfd_cell max77843_devs[] = {
> >>>> + {
> >>>> + .name = "max77843-muic",
> >>>> + .of_compatible = "maxim,max77843-muic",
> >>>> + }, {
> >>>> + .name = "max77843-regulator",
> >>>> + .of_compatible = "maxim,max77843-regulator",
> >>>> + }, {
> >>>> + .name = "max77843-charger",
> >>>> + .of_compatible = "maxim,max77843-charger"
> >>>> + }, {
> >>>> + .name = "max77843-fuelgauge",
> >>>> + .of_compatible = "maxim,max77843-fuelgauge",
> >>>> + },
> >>>> +};
> >>>> +
> >>>> +static const struct regmap_config max77843_charger_regmap_config = {
> >>>> + .reg_bits = 8,
> >>>> + .val_bits = 8,
> >>>> + .max_register = MAX77843_CHG_REG_END,
> >>>> +};
> >>>> +
> >>>> +static const struct regmap_config max77843_regmap_config = {
> >>>> + .reg_bits = 8,
> >>>> + .val_bits = 8,
> >>>> + .max_register = MAX77843_SYS_REG_END,
> >>>> +};
> >>>> +
> >>>> +static const struct regmap_irq max77843_irqs[] = {
> >>>> + /* TOPSYS interrupts */
> >>>> + { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_SYSUVLO_INT, },
> >>>> + { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_SYSOVLO_INT, },
> >>>> + { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_TSHDN_INT, },
> >>>> + { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_TM_INT, },
> >>>> +};
> >>>> +
> >>>> +static const struct regmap_irq_chip max77843_irq_chip = {
> >>>> + .name = "max77843",
> >>>> + .status_base = MAX77843_SYS_REG_SYSINTSRC,
> >>>> + .mask_base = MAX77843_SYS_REG_SYSINTMASK,
> >>>> + .mask_invert = false,
> >>>> + .num_regs = 1,
> >>>> + .irqs = max77843_irqs,
> >>>> + .num_irqs = ARRAY_SIZE(max77843_irqs),
> >>>> +};
> >>>> +
> >>>> +static int max77843_chg_init(struct max77843 *max77843)
> >>>> +{
> >>>
> >>> Could this function be moved to the charger driver? This way the
> >>> driver will manage its own resources instead of depending on parent
> >>> MFD driver.
> >>>
> >>
> >> Charger regulator and Charger share same resources.
> >> So I include this function core driver.
> >
> > OK, I see... Could you describe it in comments somewhere? For example in
> > comment above the function. Currently this looks like only as regmap for
> > charger.
> >
>
> Charger regulator and Charger use same regmap.
OK, just put it in a comment around that function.
>
> > Unfortunately current solution imposes problem with releasing resources.
> > Who is the owner of i2c dummy device?
> >
>
> Core driver owner of i2c dummy device.
OK, good idea. So the core driver should be the only place to unregister
it. So needed changes are:
1. Remove the i2c_unregister_device() call from
max77843_charger_probe().
2. Add i2c_unregister_device(max77843->i2c_chg) in max77843_remove().
The MFD core driver will handle it.
>
> > 1. The charger driver will unregister it if max77843_charger_probe()
> > fails. What will happen with regulator driver in such case?
> >
>
> Charger is enabled/disabled by Charger regulator.
> Currently, If charger probe fails, charger regulator failed to read regmap and occur panic(It have to fix.)
>
>
> > 2. Who will release this i2c dummy device in normal unbind? Currently it
> > leaks.
> >
>
> I think core driver release i2c dummy device in normal unbind.
> We need to more discussion about this problem.
> If you have any idea, I hope tell me. Again, Thank you for your advice.
I think handling the ownership in core driver could solve this.
Best regards,
Krzysztof
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
