On pią, 2015-01-23 at 15:41 +0900, Beomho Seo wrote:
> On 01/23/2015 03:32 PM, Krzysztof Kozlowski wrote:
> > 2015-01-23 6:02 GMT+01:00 Jaewon Kim <jaewon02.kim@xxxxxxxxxxx>:
> >> This patch adds MAX77843 core/irq driver to support PMIC,
> >> MUIC(Micro USB Interface Controller), Charger, Fuel Gauge,
> >> LED and Haptic device.
> >>
> >> Cc: Lee Jones <lee.jones@xxxxxxxxxx>
> >> Signed-off-by: Beomho Seo <beomho.seo@xxxxxxxxxxx>
> >> Signed-off-by: Jaewon Kim <jaewon02.kim@xxxxxxxxxxx>
> >> ---
> >> drivers/mfd/Kconfig | 14 ++
> >> drivers/mfd/Makefile | 1 +
> >> drivers/mfd/max77843.c | 241 ++++++++++++++++++++
> >> include/linux/mfd/max77843-private.h | 410 ++++++++++++++++++++++++++++++++++
> >> 4 files changed, 666 insertions(+)
> >> create mode 100644 drivers/mfd/max77843.c
> >> create mode 100644 include/linux/mfd/max77843-private.h
> >>
> >> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> >> index 2e6b731..0c67c79 100644
> >> --- a/drivers/mfd/Kconfig
> >> +++ b/drivers/mfd/Kconfig
> >> @@ -442,6 +442,20 @@ config MFD_MAX77693
> >> additional drivers must be enabled in order to use the functionality
> >> of the device.
> >>
> >> +config MFD_MAX77843
> >> + bool "Maxim Semiconductor MAX77843 PMIC Support"
> >> + depends on I2C=y
> >> + select MFD_CORE
> >> + select REGMAP_I2C
> >> + select REGMAP_IRQ
> >> + help
> >> + Say yes here to add support for Maxim Semiconductor MAX77843.
> >> + This is companion Power Management IC with LEDs, Haptic, Charger,
> >> + Fuel Gauge, MUIC(Micro USB Interface Controller) controls on chip.
> >> + This driver provides common support for accessing the device;
> >> + additional drivers must be enabled in order to use the functionality
> >> + of the device.
> >> +
> >> config MFD_MAX8907
> >> tristate "Maxim Semiconductor MAX8907 PMIC Support"
> >> select MFD_CORE
> >> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> >> index 53467e2..fe4f75c 100644
> >> --- a/drivers/mfd/Makefile
> >> +++ b/drivers/mfd/Makefile
> >> @@ -117,6 +117,7 @@ obj-$(CONFIG_MFD_DA9063) += da9063.o
> >> obj-$(CONFIG_MFD_MAX14577) += max14577.o
> >> obj-$(CONFIG_MFD_MAX77686) += max77686.o
> >> obj-$(CONFIG_MFD_MAX77693) += max77693.o
> >> +obj-$(CONFIG_MFD_MAX77843) += max77843.o
> >> obj-$(CONFIG_MFD_MAX8907) += max8907.o
> >> max8925-objs := max8925-core.o max8925-i2c.o
> >> obj-$(CONFIG_MFD_MAX8925) += max8925.o
> >> diff --git a/drivers/mfd/max77843.c b/drivers/mfd/max77843.c
> >> new file mode 100644
> >> index 0000000..d7f8b76
> >> --- /dev/null
> >> +++ b/drivers/mfd/max77843.c
> >> @@ -0,0 +1,241 @@
> >> +/*
> >> + * max77843.c - MFD core driver for the Maxim MAX77843
> >> + *
> >> + * Copyright (C) 2014 Samsung Electrnoics
> >> + * Author: Jaewon Kim <jaewon02.kim@xxxxxxxxxxx>
> >> + *
> >> + * This program is free software; you can redistribute it and/or modify
> >> + * it under the terms of the GNU General Public License as published by
> >> + * the Free Software Foundation; either version 2 of the License, or
> >> + * (at your option) any later version.
> >> + */
> >> +
> >> +#include <linux/err.h>
> >> +#include <linux/i2c.h>
> >> +#include <linux/init.h>
> >> +#include <linux/interrupt.h>
> >> +#include <linux/module.h>
> >> +#include <linux/mfd/core.h>
> >> +#include <linux/mfd/max77843-private.h>
> >> +#include <linux/of_device.h>
> >> +#include <linux/platform_device.h>
> >> +
> >> +static const struct mfd_cell max77843_devs[] = {
> >> + {
> >> + .name = "max77843-muic",
> >> + .of_compatible = "maxim,max77843-muic",
> >> + }, {
> >> + .name = "max77843-regulator",
> >> + .of_compatible = "maxim,max77843-regulator",
> >> + }, {
> >> + .name = "max77843-charger",
> >> + .of_compatible = "maxim,max77843-charger"
> >> + }, {
> >> + .name = "max77843-fuelgauge",
> >> + .of_compatible = "maxim,max77843-fuelgauge",
> >> + },
> >> +};
> >> +
> >> +static const struct regmap_config max77843_charger_regmap_config = {
> >> + .reg_bits = 8,
> >> + .val_bits = 8,
> >> + .max_register = MAX77843_CHG_REG_END,
> >> +};
> >> +
> >> +static const struct regmap_config max77843_regmap_config = {
> >> + .reg_bits = 8,
> >> + .val_bits = 8,
> >> + .max_register = MAX77843_SYS_REG_END,
> >> +};
> >> +
> >> +static const struct regmap_irq max77843_irqs[] = {
> >> + /* TOPSYS interrupts */
> >> + { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_SYSUVLO_INT, },
> >> + { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_SYSOVLO_INT, },
> >> + { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_TSHDN_INT, },
> >> + { .reg_offset = 0, .mask = MAX77843_SYS_IRQ_TM_INT, },
> >> +};
> >> +
> >> +static const struct regmap_irq_chip max77843_irq_chip = {
> >> + .name = "max77843",
> >> + .status_base = MAX77843_SYS_REG_SYSINTSRC,
> >> + .mask_base = MAX77843_SYS_REG_SYSINTMASK,
> >> + .mask_invert = false,
> >> + .num_regs = 1,
> >> + .irqs = max77843_irqs,
> >> + .num_irqs = ARRAY_SIZE(max77843_irqs),
> >> +};
> >> +
> >> +static int max77843_chg_init(struct max77843 *max77843)
> >> +{
> >
> > Could this function be moved to the charger driver? This way the
> > driver will manage its own resources instead of depending on parent
> > MFD driver.
> >
>
> Charger regulator and Charger share same resources.
> So I include this function core driver.
OK, I see... Could you describe it in comments somewhere? For example in
comment above the function. Currently this looks like only as regmap for
charger.
Unfortunately current solution imposes problem with releasing resources.
Who is the owner of i2c dummy device?
1. The charger driver will unregister it if max77843_charger_probe()
fails. What will happen with regulator driver in such case?
2. Who will release this i2c dummy device in normal unbind? Currently it
leaks.
Best regards,
Krzysztof
>
> >> + int ret;
> >> +
> >> + max77843->i2c_chg = i2c_new_dummy(max77843->i2c->adapter, I2C_ADDR_CHG);
> >> + if (!max77843->i2c_chg) {
> >> + dev_err(&max77843->i2c->dev,
> >> + "Cannot allocate I2C device for Charger\n");
> >> + return PTR_ERR(max77843->i2c_chg);
> >> + }
> >> + i2c_set_clientdata(max77843->i2c_chg, max77843);
> >> +
> >> + max77843->regmap_chg = devm_regmap_init_i2c(max77843->i2c_chg,
> >> + &max77843_charger_regmap_config);
> >> + if (IS_ERR(max77843->regmap_chg)) {
> >> + ret = PTR_ERR(max77843->regmap_chg);
> >> + goto err_chg_i2c;
> >> + }
> >> +
> >> + return 0;
> >> +
> >> +err_chg_i2c:
> >> + i2c_unregister_device(max77843->i2c_chg);
> >> +
> >> + return ret;
> >> +}
> >> +
> >> +static int max77843_probe(struct i2c_client *i2c,
> >> + const struct i2c_device_id *id)
> >> +{
> >> + struct max77843 *max77843;
> >> + int ret;
> >> + unsigned int reg_data;
> >> +
> >> + max77843 = devm_kzalloc(&i2c->dev, sizeof(*max77843), GFP_KERNEL);
> >> + if (!max77843)
> >> + return -ENOMEM;
> >> +
> >> + i2c_set_clientdata(i2c, max77843);
> >> + max77843->dev = &i2c->dev;
> >> + max77843->i2c = i2c;
> >> + max77843->irq = i2c->irq;
> >> +
> >> + max77843->regmap = devm_regmap_init_i2c(i2c,
> >> + &max77843_regmap_config);
> >> + if (IS_ERR(max77843->regmap)) {
> >> + dev_err(&i2c->dev, "Failed to allocate topsys register map\n");
> >> + return PTR_ERR(max77843->regmap);
> >> + }
> >> +
> >> + ret = regmap_add_irq_chip(max77843->regmap, max77843->irq,
> >> + IRQF_TRIGGER_LOW | IRQF_ONESHOT | IRQF_SHARED,
> >> + 0, &max77843_irq_chip, &max77843->irq_data);
> >
> > Why shared IRQ?
> >
> >> + if (ret) {
> >> + dev_err(&i2c->dev, "Failed to add TOPSYS IRQ chip\n");
> >> + return ret;
> >> + }
> >> +
> >> + ret = regmap_read(max77843->regmap,
> >> + MAX77843_SYS_REG_PMICID, ®_data);
> >> + if (ret < 0) {
> >> + dev_err(&i2c->dev, "Failed to read PMIC ID\n");
> >> + goto err_pmic_id;
> >> + }
> >> + dev_info(&i2c->dev, "device ID: 0x%x\n", reg_data);
> >> +
> >> + ret = max77843_chg_init(max77843);
> >> + if (ret) {
> >> + dev_err(&i2c->dev, "Failed to init Charger\n");
> >> + goto err_pmic_id;
> >> + }
> >> +
> >> + ret = regmap_update_bits(max77843->regmap,
> >> + MAX77843_SYS_REG_INTSRCMASK,
> >> + MAX77843_INTSRC_MASK_MASK,
> >> + (unsigned int)~MAX77843_INTSRC_MASK_MASK);
> >> + if (ret < 0) {
> >> + dev_err(&i2c->dev, "Failed to unmask interrupt sourece\n");
> >
> > s/sourece/source/
> >
> > Best regards,
> > Krzysztof
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-pm" in
> > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> >
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
