Hi, this series fixes several issues on TQMa7x DT files in various aspects. Probably most notabe one is disabling PCIe due to missing support for internal PHY refclock. Best regards, Alexander Alexander Stein (23): ARM: dts: imx7-tqma7/mba7: convert fsl,pins to uint32-matrix ARM: dts: imx7[d]-mba7: Move ethernet PHY reset into PHY node ARM: dts: imx7[d]-mba7: disable USB OC on USB host and USB OTG2 ARM: dts: imx7[d]-mba7: disable PCIe interface ARM: dts: imx7[d]-mba7: hog Mini PCIe signals ARM: dts: imx7-mba7: Mark gpio-buttons as wakeup-source ARM: dts: imx7-mba7: Enable SNVS power key ARM: dts: imx7-mba7: Add RTC aliases ARM: dts: imx7-mba7: Add SPI1_SS0 as chip select 3 ARM: dts: imx7-tqma7: Add i2c bus recovery ARM: dts: imx7-mba7: Add i2c bus recovery ARM: dts: imx7-tqma7: fix EEPROM compatible for SE97BTP ARM: dts: imx7-mba7: Fix iomuxc node names ARM: dts: imx7-tqma7: Fix iomuxc node names ARM: dts: imx7-mba7: restrict usdhc interface modes ARM: dts: imx7-tqma7: restrict usdhc interface modes ARM: dts: imx7-tqma7: remove superfluous status property ARM: dts: imx7-tqma7: mark system data eeprom as read-only ARM: dts: imx7-tqma7: rename node for SE97BTP ARM: dts: imx7d-mba7: Remove USB OTG related properties on USB node ARM: dts: imx7-tqma7: Add missing vcc supply to i2c eeproms ARM: dts: imx7-mba7: Add missing vcc supply to i2c devices ARM: dts: imx7-tqma7: Fix PMIC v33 rail voltage range arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi | 325 ++++++++++++---------- arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi | 144 +++++----- arch/arm/boot/dts/nxp/imx/imx7d-mba7.dts | 94 ++++--- 3 files changed, 312 insertions(+), 251 deletions(-) -- 2.34.1
