[PATCH 02/23] ARM: dts: imx7[d]-mba7: Move ethernet PHY reset into PHY node

[Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>]

Split pinctrl as well. 'reset-deassert-us' is added with a small safe
margin.

Signed-off-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
---
 arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi | 13 ++++++++++---
 arch/arm/boot/dts/nxp/imx/imx7d-mba7.dts | 13 ++++++++++---
 2 files changed, 20 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi
index 2e406cc7d292..c2be1a75f70d 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi
@@ -214,8 +214,6 @@ &fec1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet1>;
 	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio7 15 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <1>;
 	phy-supply = <&reg_fec1_pwdn>;
 	phy-handle = <&ethphy1_0>;
 	fsl,magic-packet;
@@ -228,10 +226,15 @@ mdio {
 		ethphy1_0: ethernet-phy@0 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_enet1_phy>;
 			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
 			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
 			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			reset-gpios = <&gpio7 15 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <500>;
 		};
 	};
 };
@@ -366,7 +369,11 @@ pinctrl_enet1: enet1grp {
 			<MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1		0x79>,
 			<MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2		0x79>,
 			<MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3		0x79>,
-			<MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x79>,
+			<MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x79>;
+	};
+
+	pinctrl_enet1_phy: enet1phygrp {
+		fsl,pins =
 			/* Reset: SION, 100kPU, SRE_FAST, DSE_X1 */
 			<MX7D_PAD_ENET1_COL__GPIO7_IO15				0x40000070>,
 			/* INT/PWDN: SION, 100kPU, HYS, SRE_FAST, DSE_X1 */
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-mba7.dts b/arch/arm/boot/dts/nxp/imx/imx7d-mba7.dts
index 79a6d82b453a..4ea1801a7aed 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7d-mba7.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-mba7.dts
@@ -21,8 +21,6 @@ &fec2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet2>;
 	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <1>;
 	phy-supply = <&reg_fec2_pwdn>;
 	phy-handle = <&ethphy2_0>;
 	fsl,magic-packet;
@@ -35,10 +33,15 @@ mdio {
 		ethphy2_0: ethernet-phy@0 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_enet2_phy>;
 			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
 			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
 			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <500>;
 		};
 	};
 };
@@ -62,7 +65,11 @@ pinctrl_enet2: enet2grp {
 			<MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1		0x79>,
 			<MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2		0x79>,
 			<MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3		0x79>,
-			<MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL	0x79>,
+			<MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL	0x79>;
+	};
+
+	pinctrl_enet2_phy: enet2phygrp {
+		fsl,pins =
 			/* Reset: SION, 100kPU, SRE_FAST, DSE_X1 */
 			<MX7D_PAD_EPDC_BDR0__GPIO2_IO28		0x40000070>,
 			/* INT/PWDN: SION, 100kPU, HYS, SRE_FAST, DSE_X1 */
-- 
2.34.1