Add pinctrl device. Signed-off-by: Huqiang Qin <huqiang.qin@xxxxxxxxxxx> Reviewed-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx> --- V1 -> V2: Unchanged. V2 -> V3: Unchanged. arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi index dae3465bd39b..a03c7667d2b6 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi +++ b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi @@ -155,6 +155,22 @@ watchdog@2100 { clocks = <&xtal>; }; + periphs_pinctrl: pinctrl@4000 { + compatible = "amlogic,t7-periphs-pinctrl"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio: bank@4000 { + reg = <0x0 0x4000 0x0 0x0064>, + <0x0 0x40c0 0x0 0x0220>; + reg-names = "mux", "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 0 157>; + }; + }; + uart_a: serial@78000 { compatible = "amlogic,t7-uart", "amlogic,meson-s4-uart"; reg = <0x0 0x78000 0x0 0x18>; -- 2.42.0