Re: [PATCH V3 3/3] arm64: dts: Add pinctrl node for Amlogic T7 SoCs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 22-09-2023 10:43, Huqiang Qin wrote:
Add pinctrl device.

Signed-off-by: Huqiang Qin <huqiang.qin@xxxxxxxxxxx>
Reviewed-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---

V1 -> V2: Unchanged.
V2 -> V3: Unchanged.

  arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi | 16 ++++++++++++++++
  1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
index dae3465bd39b..a03c7667d2b6 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
@@ -155,6 +155,22 @@ watchdog@2100 {
  				clocks = <&xtal>;
  			};
+ periphs_pinctrl: pinctrl@4000 {
+				compatible = "amlogic,t7-periphs-pinctrl";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges;
+
+				gpio: bank@4000 {
+					reg = <0x0 0x4000 0x0 0x0064>,
+					      <0x0 0x40c0 0x0 0x0220>;
+					reg-names = "mux", "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 0 157>;
+				};
+			};
+
  			uart_a: serial@78000 {
  				compatible = "amlogic,t7-uart", "amlogic,meson-s4-uart";
  				reg = <0x0 0x78000 0x0 0x18>;
Tested-by: Lucas Tanure <tanure@xxxxxxxxx>




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux