From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
Add the MDC and MDIO pin functions for ethernet1 on sa8775p-ride.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
index 09ae6e153282..38327aff18b0 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
+++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
@@ -480,6 +480,22 @@ ethernet0_mdio: ethernet0-mdio-pins {
};
};
+ ethernet1_default: ethernet1-default-state {
+ ethernet1_mdc: ethernet1-mdc-pins {
+ pins = "gpio20";
+ function = "emac1_mdc";
+ drive-strength = <16>;
+ bias-pull-up;
+ };
+
+ ethernet1_mdio: ethernet1-mdio-pins {
+ pins = "gpio21";
+ function = "emac1_mdio";
+ drive-strength = <16>;
+ bias-pull-up;
+ };
+ };
+
qup_uart10_default: qup-uart10-state {
pins = "gpio46", "gpio47";
function = "qup1_se3";
--
2.39.2
