On Mon, Aug 07, 2023 at 09:35:02PM +0200, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
>
> Add the MDC and MDIO pin functions for ethernet1 on sa8775p-ride.
>
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
> index 09ae6e153282..38327aff18b0 100644
> --- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
> +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
> @@ -480,6 +480,22 @@ ethernet0_mdio: ethernet0-mdio-pins {
> };
> };
>
> + ethernet1_default: ethernet1-default-state {
> + ethernet1_mdc: ethernet1-mdc-pins {
> + pins = "gpio20";
> + function = "emac1_mdc";
> + drive-strength = <16>;
> + bias-pull-up;
> + };
> +
> + ethernet1_mdio: ethernet1-mdio-pins {
> + pins = "gpio21";
> + function = "emac1_mdio";
> + drive-strength = <16>;
> + bias-pull-up;
> + };
> + };
> +
With the whole "EMAC0 MDIO handles the ethernet phy for EMAC1", this
doesn't seem to make sense.
I don't have all the schematics, but these pins are not connected from
what I see.
