On 2.08.2023 11:59, Rohit Agarwal wrote:
> Add rpmhpd node and opps for this node to the SDX75 dts.
>
> Signed-off-by: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sdx75.dtsi | 51 +++++++++++++++++++++++++++++++++++++
> 1 file changed, 51 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdx75.dtsi b/arch/arm64/boot/dts/qcom/sdx75.dtsi
> index 5e9602cd..3a1d37a 100644
> --- a/arch/arm64/boot/dts/qcom/sdx75.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdx75.dtsi
> @@ -9,6 +9,7 @@
> #include <dt-bindings/clock/qcom,rpmh.h>
> #include <dt-bindings/clock/qcom,sdx75-gcc.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/power/qcom,rpmhpd.h>
> #include <dt-bindings/soc/qcom,rpmh-rsc.h>
>
> / {
> @@ -666,6 +667,56 @@
> clock-names = "xo";
> #clock-cells = <1>;
> };
> +
> + rpmhpd: power-controller {
> + compatible = "qcom,sdx75-rpmhpd";
> + #power-domain-cells = <1>;
> + operating-points-v2 = <&rpmhpd_opp_table>;
> +
> + rpmhpd_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + rpmhpd_opp_ret: opp1 {
Please use opp-(value-of-opp-level) here, we've hit a few cases
where introducing levels inbetween was necessary and this would
limit the diff if that was the case again, so opp-16 etc.
Konrad
