On 8/2/2023 6:18 PM, Konrad Dybcio wrote:
On 2.08.2023 11:59, Rohit Agarwal wrote:
Add rpmhpd node and opps for this node to the SDX75 dts.
Signed-off-by: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sdx75.dtsi | 51 +++++++++++++++++++++++++++++++++++++
1 file changed, 51 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdx75.dtsi b/arch/arm64/boot/dts/qcom/sdx75.dtsi
index 5e9602cd..3a1d37a 100644
--- a/arch/arm64/boot/dts/qcom/sdx75.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdx75.dtsi
@@ -9,6 +9,7 @@
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/clock/qcom,sdx75-gcc.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
/ {
@@ -666,6 +667,56 @@
clock-names = "xo";
#clock-cells = <1>;
};
+
+ rpmhpd: power-controller {
+ compatible = "qcom,sdx75-rpmhpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmhpd_opp_table>;
+
+ rpmhpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmhpd_opp_ret: opp1 {
Please use opp-(value-of-opp-level) here, we've hit a few cases
where introducing levels inbetween was necessary and this would
limit the diff if that was the case again, so opp-16 etc.
Will update this as well
Thanks,
Rohit.
Konrad
