Hi, This series add support of pmics that are found in SDX75 platform and add the corresponding regulators in the IDP platform as well. It also parallely updates the pmic found in SDX65 to PM7250b and add pinctrl support for the same pmic chip. This series is based on the new header inclusion[1] and movement of the regulators level from rpmpd to rpmhpd[2]. This series can be picked after successfully picking [2] and [3] as [1] has already been applied. [1] https://lore.kernel.org/all/1689744162-9421-1-git-send-email-quic_rohiagar@xxxxxxxxxxx/ [2] https://lore.kernel.org/all/1690781104-2290-1-git-send-email-quic_rohiagar@xxxxxxxxxxx/ [3] https://lore.kernel.org/all/1690461813-22564-1-git-send-email-quic_rohiagar@xxxxxxxxxxx/ Thanks, Rohit. Rohit Agarwal (8): arm64: dts: qcom: sdx75: Add spmi node arm64: dts: qcom: Add pinctrl gpio support for pm7250b arm64: dts: qcom: Add PMIC pm7550ba dtsi arm64: dts: qcom: Add PMIC pmx75 dtsi ARM: dts: qcom: sdx65-mtp: Update the pmic used in sdx65 arm64: dts: qcom: sdx75-idp: Add pmics supported in SDX75 arm64: dts: qcom: sdx75: Add rpmhpd node arm64: dts: qcom: sdx75-idp: Add regulator nodes arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts | 2 +- arch/arm64/boot/dts/qcom/pm7250b.dtsi | 10 ++ arch/arm64/boot/dts/qcom/pm7550ba.dtsi | 70 ++++++++++ arch/arm64/boot/dts/qcom/pmx75.dtsi | 64 ++++++++++ arch/arm64/boot/dts/qcom/sdx75-idp.dts | 205 ++++++++++++++++++++++++++++++ arch/arm64/boot/dts/qcom/sdx75.dtsi | 74 +++++++++++ 6 files changed, 424 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/boot/dts/qcom/pm7550ba.dtsi create mode 100644 arch/arm64/boot/dts/qcom/pmx75.dtsi -- 2.7.4
