Dne torek, 16. maj 2023 ob 19:46:55 CEST je Jonathan McDowell napisal(a): > This small patch series adds some improvements for the C.H.I.P DTS, > enabling bluetooth, exporting the PMIC temperature details via iio-hwmon > and finally adding the appropriate base pinmux info for an external MMC > card. As a pre-requisite for the Bluetooth it also adds support to the > AXP209 driver for GPIO3, which is the Bluetooth device wakeup line. > > v3: > - Add Reviewed-By/Acked-Bys > - Drop redundant else > - Switch to GENMASK/decimal values for GPIO3 function defs > v2: > - Fix missing ; on bluetooth stanza in DTS > - Add device/host wake GPIOs for Bluetooth device > - Add omit-if-no-ref on the port E pinmux stanza > - Rename axp20x_temp to pmic-temp > - Add AXP209 GPIO3 support > > Jonathan McDowell (5): > dt-bindings: gpio: Add GPIO3 for AXP209 GPIO binding schema > pinctrl: axp209: Add support for GPIO3 on the AXP209 > ARM: dts: sun5i: chip: Enable bluetooth > ARM: dts: sun5i: Add port E pinmux settings for mmc2 > ARM: dts: axp209: Add iio-hwmon node for internal temperature Patches 3-5 applied to sunxi tree. Thanks! Best regards, Jernej > > .../bindings/gpio/x-powers,axp209-gpio.yaml | 1 + > arch/arm/boot/dts/axp209.dtsi | 7 ++++ > arch/arm/boot/dts/sun5i-r8-chip.dts | 6 +++ > arch/arm/boot/dts/sun5i.dtsi | 9 ++++ > drivers/pinctrl/pinctrl-axp209.c | 42 +++++++++++++++++++ > 5 files changed, 65 insertions(+) > >
