This small patch series adds some improvements for the C.H.I.P DTS, enabling bluetooth, exporting the PMIC temperature details via iio-hwmon and finally adding the appropriate base pinmux info for an external MMC card. As a pre-requisite for the Bluetooth it also adds support to the AXP209 driver for GPIO3, which is the Bluetooth device wakeup line. v2: - Fix missing ; on bluetooth stanza in DTS - Add device/host wake GPIOs for Bluetooth device - Add omit-if-no-ref on the port E pinmux stanza - Rename axp20x_temp to pmic-temp - Add AXP209 GPIO3 support Jonathan McDowell (5): dt-bindings: gpio: Add GPIO3 for AXP209 GPIO binding schema pinctrl: axp209: Add support for GPIO3 on the AXP209 ARM: dts: sun5i: chip: Enable bluetooth ARM: dts: sun5i: Add port E pinmux settings for mmc2 ARM: dts: axp209: Add iio-hwmon node for internal temperature .../bindings/gpio/x-powers,axp209-gpio.yaml | 1 + arch/arm/boot/dts/axp209.dtsi | 7 ++++ arch/arm/boot/dts/sun5i-r8-chip.dts | 6 +++ arch/arm/boot/dts/sun5i.dtsi | 9 ++++ drivers/pinctrl/pinctrl-axp209.c | 42 +++++++++++++++++++ 5 files changed, 65 insertions(+) -- 2.39.2
