From: Ryan Wanner <Ryan.Wanner@xxxxxxxxxxxxx> Enable push-pull configuration. Remove integer value argument from open-drain configuration as it is discarded when pinconf function is called from gpiolib. Add push-pull do debug and get functions. Signed-off-by: Ryan Wanner <Ryan.Wanner@xxxxxxxxxxxxx> --- drivers/pinctrl/pinctrl-at91-pio4.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/drivers/pinctrl/pinctrl-at91-pio4.c b/drivers/pinctrl/pinctrl-at91-pio4.c index 2fe40acb6a3e..3c39d62bbc3c 100644 --- a/drivers/pinctrl/pinctrl-at91-pio4.c +++ b/drivers/pinctrl/pinctrl-at91-pio4.c @@ -762,6 +762,11 @@ static int atmel_conf_pin_config_group_get(struct pinctrl_dev *pctldev, return -EINVAL; arg = 1; break; + case PIN_CONFIG_DRIVE_PUSH_PULL: + if (res & ATMEL_PIO_OPD_MASK) + return -EINVAL; + arg = 1; + break; case PIN_CONFIG_INPUT_SCHMITT_ENABLE: if (!(res & ATMEL_PIO_SCHMITT_MASK)) return -EINVAL; @@ -827,10 +832,10 @@ static int atmel_conf_pin_config_group_set(struct pinctrl_dev *pctldev, conf &= (~ATMEL_PIO_PUEN_MASK); break; case PIN_CONFIG_DRIVE_OPEN_DRAIN: - if (arg == 0) - conf &= (~ATMEL_PIO_OPD_MASK); - else - conf |= ATMEL_PIO_OPD_MASK; + conf |= ATMEL_PIO_OPD_MASK; + break; + case PIN_CONFIG_DRIVE_PUSH_PULL: + conf &= (~ATMEL_PIO_OPD_MASK); break; case PIN_CONFIG_INPUT_SCHMITT_ENABLE: if (arg == 0) @@ -948,6 +953,8 @@ static void atmel_conf_pin_config_dbg_show(struct pinctrl_dev *pctldev, seq_printf(s, "%s ", "debounce"); if (conf & ATMEL_PIO_OPD_MASK) seq_printf(s, "%s ", "open-drain"); + if (!(conf & ATMEL_PIO_OPD_MASK)) + seq_printf(s, "%s ", "push-pull"); if (conf & ATMEL_PIO_SCHMITT_MASK) seq_printf(s, "%s ", "schmitt"); if (atmel_pioctrl->slew_rate_support && (conf & ATMEL_PIO_SR_MASK)) -- 2.39.2
