From: Ryan Wanner <Ryan.Wanner@xxxxxxxxxxxxx> Add generic push-pull support for pio4 driver. Signed-off-by: Ryan Wanner <Ryan.Wanner@xxxxxxxxxxxxx> --- .../devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt index e2b861ce16d8..774c3c269c40 100644 --- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt @@ -37,7 +37,8 @@ right representation of the pin. Optional properties: - GENERIC_PINCONFIG: generic pinconfig options to use: - bias-disable, bias-pull-down, bias-pull-up, drive-open-drain, - input-schmitt-enable, input-debounce, output-low, output-high. + drive-push-pull input-schmitt-enable, input-debounce, output-low, + output-high. - for microchip,sama7g5-pinctrl only: - slew-rate: 0 - disabled, 1 - enabled (default) - atmel,drive-strength: 0 or 1 for low drive, 2 for medium drive and 3 for -- 2.39.2
