From: Ryan Wanner <Ryan.Wanner@xxxxxxxxxxxxx> This patch set enables push-pull pin configuation for PIO4 IP as well as updating the DT binding. Removing the integer argument for open-drain allows the driver to process drive configuration from gpiolib as the integer argument is discarded. Ryan Wanner (3): pinctrl: at91-pio4: Enable Push-Pull configuration dt-bindings: pinctrl: at91-pio4: Add push-pull support ARM: dts: at91: Return to boolean properties .../bindings/pinctrl/atmel,at91-pio4-pinctrl.txt | 3 ++- arch/arm/boot/dts/at91-kizbox3-hs.dts | 2 +- arch/arm/boot/dts/at91-kizbox3_common.dtsi | 2 +- drivers/pinctrl/pinctrl-at91-pio4.c | 15 +++++++++++---- 4 files changed, 15 insertions(+), 7 deletions(-) -- 2.39.2
