Re: [PATCH v9 2/2] spi: loongson: add bus driver for the loongson spi controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





在 2023/5/8 下午11:04, andy.shevchenko@xxxxxxxxx 写道:
Wed, Apr 26, 2023 at 03:10:45PM +0800, Yinbo Zhu kirjoitti:
This bus driver supports the Loongson spi hardware controller in the
Loongson platforms and supports to use DTS and PCI framework to
register spi device resources.

SPI

okay I got it.

...

+config SPI_LOONGSON_CORE
+	tristate "Loongson SPI Controller Core Driver Support"

Does it need to be visible to the user?

okay, I will set it invisible.

+	depends on LOONGARCH || COMPILE_TEST
+	help
+	  This core driver supports the Loongson spi hardware controller in
+	  the Loongson platforms.
+	  Say Y or M here if you want to use the SPI controller on
+	  Loongson platform.

...

+config SPI_LOONGSON_PLATFORM
+	tristate "Loongson SPI Controller Platform Driver Support"
+	select SPI_LOONGSON_CORE
+	depends on OF && (LOONGARCH || COMPILE_TEST)

Is it really dependent to OF? Why?

Yes, because this driver need depend on device tree.

+	help
+	  This bus driver supports the Loongson spi hardware controller in
+	  the Loongson platforms and supports to use DTS framework to
+	  register spi device resources.
+	  Say Y or M here if you want to use the SPI controller on
+	  Loongson platform.

...

+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/spi/spi.h>
+#include <linux/clk.h>
+#include <linux/io.h>

Ordered?

okay, I got it.

...

+	if (loongson_spi->mode & SPI_NO_CS)
+		loongson_spi_write_reg(loongson_spi, LOONGSON_SPI_SFCS_REG, 0);

Missing {}

okay, I got it.

+	else {
+		cs = loongson_spi_read_reg(loongson_spi, LOONGSON_SPI_SFCS_REG)
+					   & ~(0x11 << spi->chip_select);
+		loongson_spi_write_reg(loongson_spi,
+				       LOONGSON_SPI_SFCS_REG,
+				       (val ? (0x11 << spi->chip_select) :
+				       (0x1 << spi->chip_select)) | cs);

Too many parentheses.

+	}

...

+	const char rdiv[12] = {0, 1, 4, 2, 3, 5, 6, 7, 8, 9, 10, 11};

Oh, why?!

As you understand in another mail, you are right!

00 00  [0]  <= 2
00 01  [1]  <= 4
01 00  [2]  <= 8
00 10  [3]  <= 16
00 11  [4]  <= 32
01 01  [5]  <= 64
01 10  [6]  <= 128
01 11  [7]  <= 256
10 00  [8]  <= 512
10 01  [9]  <= 1024
10 10  [10]  <= 2048
10 11  [11]  <= 4096

...

+	if ((hz && loongson_spi->hz != hz) ||
+	    ((spi->mode ^ loongson_spi->mode) & (SPI_CPOL | SPI_CPHA))) {
+		div = DIV_ROUND_UP_ULL(loongson_spi->clk_rate, hz);

+		if (div < 2)
+			div = 2;
+		if (div > 4096)
+			div = 4096;

NIH clamp_val()

okay, I will use it.

+		bit = fls(div) - 1;
+		if ((1<<bit) == div)
+			bit--;
+		div_tmp = rdiv[bit];

I believe this can be optimized.

okay, I will apply your optimization advice in another mail for my
patch.

+		dev_dbg(&spi->dev, "clk_rate = %llu hz = %d div_tmp = %d bit = %d\n",
+			loongson_spi->clk_rate, hz, div_tmp, bit);
+
+		loongson_spi->hz = hz;
+		loongson_spi->spcr = div_tmp & 3;
+		loongson_spi->sper = (div_tmp >> 2) & 3;
+		val = loongson_spi_read_reg(loongson_spi, LOONGSON_SPI_SPCR_REG);
+		val &= ~0xc;

GENMASK()
okay, I got it.

+		if (spi->mode & SPI_CPOL)
+			val |= 8;

BIT()
okay, I got it.

+		if (spi->mode & SPI_CPHA)
+			val |= 4;

+		loongson_spi_write_reg(loongson_spi, LOONGSON_SPI_SPCR_REG, (val & ~3) |
+				       loongson_spi->spcr);
+		val = loongson_spi_read_reg(loongson_spi, LOONGSON_SPI_SPER_REG);
+		loongson_spi_write_reg(loongson_spi, LOONGSON_SPI_SPER_REG, (val & ~3) |
+				       loongson_spi->sper);
+		loongson_spi->mode &= SPI_NO_CS;
+		loongson_spi->mode |= spi->mode;
+	}

...

+		while ((loongson_spi_read_reg(loongson_spi, LOONGSON_SPI_SPSR_REG) & 0x1) == 1 &&
+			time_after(timeout, jiffies))
+			cpu_relax();

iopoll.h has a suitable macro for this.
okay, I will use read_poll_timeout or similar api in iopoll.h for this.

...

+		while ((loongson_spi_read_reg(loongson_spi, LOONGSON_SPI_SPSR_REG) & 0x1) == 1 &&
+			time_after(timeout, jiffies))
+			cpu_relax();

Ditto.
okay, I got it.

...

+	master = devm_spi_alloc_master(dev, sizeof(struct loongson_spi));
+	if (master == NULL) {

+		dev_info(dev, "master allocation failed\n");

We do not issue a message for ENOMEM

I will remove the dmesg.

+		return -ENOMEM;
+	}

...

+	master->dev.of_node = of_node_get(dev->of_node);

device_set_node()

okay, I got it.

...

+	spi->base = devm_ioremap(dev, res->start, resource_size(res));

Why not devm_ioremap_resource()?

I will use devm_platform_ioremap_resource as your low text advice and
there will be no needed for devm_ioremap_resource.


+	if (spi->base == NULL) {
+		dev_err(dev, "cannot map io\n");
+		return -ENXIO;

	return dev_err_probe();
okay, I got it.

+	}

...

+	clk = devm_clk_get(dev, NULL);

Can we hav

+	if (!IS_ERR(clk))

Use _optional variant above instead of this.
Do not forget about deferred probe.

I will use devm_clk_get_optional and dev_err_probe to replace above.

+		spi->clk_rate = clk_get_rate(clk);

...

+	if (of_get_property(dev->of_node, "spi-nocs", NULL))
+		spi->mode |= SPI_NO_CS;

Don't we have something in the SPI core to handle this in a generic way?

The 2k500 has two type spi controller. one type was different other loongson-2 common spi. and other loongson-2 SoCs was only a common type
spi.

loongson-2 common type spi cs:
bit0: spi:csn_en0
bit4: spi_csn0
bit1: spi_csn_en1
bit5: spi_csn1
bit2: spi_csn_en2
bit6: spi_csn2
bit3: spi_csn_en3
bit7: spi_csn3

loongson-2 special type spi one cs:
bit0: spi_csn
bit1: spi_csn_en

The difference between the special type spi and common type spi not only
cs number but has register definition struct. The spi core seems unable
to use generic way to cover it.

and I found it has still has some issues that current code is compatible special type spi, so I will drop special type spi support and leave only
support for common type spi.  Support special type spi as needed in the
future.

...


+EXPORT_SYMBOL_GPL(loongson_spi_init_master);

Please, use _NS variant.

...

+MODULE_DESCRIPTION("Loongson spi core driver");

SPI

okay, I got it.

...

+	struct resource res[2];
+	struct device *dev = &pdev->dev;
+
+	ret = pci_enable_device(pdev);

pcim_enable_device()

okay,  I got it.

+	if (ret < 0) {
+		dev_err(dev, "cannot enable pci device\n");
+		goto err_out;

	return dev_err_probe();

okay, I got it.

+	}
+
+	ret = pci_request_region(pdev, 0, "loongson-spi io");
+	if (ret < 0) {
+		dev_err(dev, "cannot request region 0.\n");
+		goto err_out;
+	}
+
+	res[0].start = pci_resource_start(pdev, 0);
+	res[0].end = pci_resource_end(pdev, 0);

What's wrong with pcim_iomap_regions()?
No wrong, I don't notice it and I will use pcim_iomap_regions.

...

+	ret = pci_read_config_byte(pdev, PCI_INTERRUPT_LINE, &v8);

What?!

What's wrong with pci_alloc_irq_vectors()?

If the interupt is needed that I will use pci_alloc_irq_vectors.
currently, the driver is not using irq and I may  disacard
the parsing of interrupts.

+
+	if (ret == PCIBIOS_SUCCESSFUL) {
+		res[1].start = v8;
+		res[1].end = v8;
+	}
+
+	ret = loongson_spi_init_master(dev, res);

Why not passing the remapped address and IRQ number instead?

okay I got it.

+	if (ret)
+		dev_err(dev, "failed to initialize master\n");

	return dev_err_probe();

+
+err_out:

Completely useless. Return in-line.

I will remove the "err_out".

+	return ret;
+}

...

+static struct pci_device_id loongson_spi_devices[] = {
+	{PCI_DEVICE(0x14, 0x7a0b)},
+	{PCI_DEVICE(0x14, 0x7a1b)},

Can you define vendor ID in pci_ids.h?

okay, I will add it into pci_ids.h.


+	{0, 0, 0, 0, 0, 0, 0}

What is this? Why {} is not working for you?
I will remove that.

+};

+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {

Why not using devm_platform_ioremap_resource()?
okay, I will use it.

+		dev_err(dev, "cannot get io resource memory\n");
+		return -ENOENT;

	return dev_err_probe();
okay, I got it.

+	}
+
+	ret = loongson_spi_init_master(dev, res);
+	if (ret)
+		dev_err(dev, "failed to initialize master\n");

Ditto.
okay, I got it.

...

+static const struct of_device_id loongson_spi_id_table[] = {
+	{ .compatible = "loongson,ls2k-spi", },

Inned comma is redundant.
okay, I got it.

+	{ }
+};

...

+#ifndef __LINUX_SPI_LOONGSON_H
+#define __LINUX_SPI_LOONGSON_H

Missing bits.h
Missing types.h
Missing declaration for msecs_to_jiffies()
Missing forward declarations for struct spi_master and struct device.
MIssing declaration for dev_pm_ops.

okay, I will add it.


+#define	LOONGSON_SPI_SPCR_REG	0x00
+#define	LOONGSON_SPI_SPSR_REG	0x01
+#define	LOONGSON_SPI_FIFO_REG	0x02
+#define	LOONGSON_SPI_SPER_REG	0x03
+#define	LOONGSON_SPI_PARA_REG	0x04
+#define	LOONGSON_SPI_SFCS_REG	0x05
+#define	LOONGSON_SPI_TIMI_REG	0x06
+
+/* Bits definition for Loongson SPI register */
+#define	LOONGSON_SPI_PARA_MEM_EN	BIT(0)
+#define	LOONGSON_SPI_SPSR_SPIF	BIT(7)
+#define	LOONGSON_SPI_SPSR_WCOL	BIT(6)
+#define	LOONGSON_SPI_SPCR_SPE	BIT(6)
+
+#define SPI_COMPLETION_TIMEOUT	msecs_to_jiffies(2000)
+
+struct loongson_spi {
+	struct	spi_master	*master;
+	void __iomem		*base;
+	int			cs_active;
+	unsigned int		hz;
+	unsigned char		spcr;
+	unsigned char		sper;
+	unsigned char		spsr;
+	unsigned char		para;
+	unsigned char		sfcs;
+	unsigned char		timi;
+	unsigned int		mode;
+	u64			clk_rate;
+};
+
+extern int loongson_spi_init_master(struct device *dev, struct resource *res);

No extern for the function declarations.

okay, I got it.

+extern const struct dev_pm_ops loongson_spi_dev_pm_ops;

+#endif /* __LINUX_SPI_LOONGSON_H */





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux