Re: [PATCH v3 6/6] iio: mlx90614: Add MLX90615 support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Acked-by: Crt Mori <cmo@xxxxxxxxxxx>

On Wed, 10 May 2023 at 12:23, Marek Vasut <marex@xxxxxxx> wrote:
>
> Add support for MLX90615 Infra Red Thermometer, which seems to be
> the predecesor of MLX90614 . There are significant differences in
> the register layout compared to MLX90614, but the functionality
> of the device is virtually identical.
>
> The following differences have been identified:
> - RAM/EEPROM/SLEEP access opcodes are different
> - RAM/EEPROM registers are at different offsets
> - EEPROM emissivity and configuration registers are at different offsets
> - EEPROM configuration register bits are shuffled around
> - EEPROM emissivity settings are 14 bit on MLX90615 , 16 bit on MLX90614
> - MLX90615 can only ever support one sensor, MLX90614 could support two
> - FIR filter is set to fixed settings on MLX90615
> - IIR filter coefficients are different
>
> This patch fills in the MLX90615 specific description and quirk handling.
>
> The IIR filter coefficients were provided by Melexis as follows:
> 0b0000 - Forbidden value
> 0b0001 - 100% - settling time = refresh rate = 205ms (around 5Hz)
> 0b0010 - 50% - settling time = 2050ms (around 0.5Hz)
> 0b0011 - 33% - settling time = 36900ms (around 0.3Hz)
> 0b0100 - 25% - settling time = 5125ms (around 0.2Hz)
> 0b0101 - 20% - settling time = 6355ms (around 0.15Hz)
> 0b0110 - 17% - settling time = 7790ms (around 0.13Hz)
> 0b0111 - 14% - settling time = 9225ms (around 0.1Hz)
>
> Signed-off-by: Marek Vasut <marex@xxxxxxx>
> ---
> Cc: Crt Mori <cmo@xxxxxxxxxxx>
> Cc: Jonathan Cameron <jic23@xxxxxxxxxx>
> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@xxxxxxxxxx>
> Cc: Lars-Peter Clausen <lars@xxxxxxxxxx>
> Cc: Marek Vasut <marex@xxxxxxx>
> Cc: Peter Meerwald <pmeerw@xxxxxxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Cc: devicetree@xxxxxxxxxxxxxxx
> Cc: linux-iio@xxxxxxxxxxxxxxx
> ---
> V2: Split the patch up into cleanups, abstraction and MLX90615 addition
> V3: Drop emissivity_res, update IIR filter coefficients per Melexis input
> ---
>  drivers/iio/temperature/mlx90614.c | 48 +++++++++++++++++++++++++++---
>  1 file changed, 44 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/iio/temperature/mlx90614.c b/drivers/iio/temperature/mlx90614.c
> index 3aa108a652bb4..b2affcb795e00 100644
> --- a/drivers/iio/temperature/mlx90614.c
> +++ b/drivers/iio/temperature/mlx90614.c
> @@ -1,12 +1,15 @@
>  // SPDX-License-Identifier: GPL-2.0-only
>  /*
> - * mlx90614.c - Support for Melexis MLX90614 contactless IR temperature sensor
> + * mlx90614.c - Support for Melexis MLX90614/MLX90615 contactless IR temperature sensor
>   *
>   * Copyright (c) 2014 Peter Meerwald <pmeerw@xxxxxxxxxx>
>   * Copyright (c) 2015 Essensium NV
>   * Copyright (c) 2015 Melexis
>   *
> - * Driver for the Melexis MLX90614 I2C 16-bit IR thermopile sensor
> + * Driver for the Melexis MLX90614/MLX90615 I2C 16-bit IR thermopile sensor
> + *
> + * MLX90614 - 17-bit ADC + MLX90302 DSP
> + * MLX90615 - 16-bit ADC + MLX90325 DSP
>   *
>   * (7-bit I2C slave address 0x5a, 100KHz bus speed only!)
>   *
> @@ -35,6 +38,10 @@
>  #define MLX90614_OP_EEPROM     0x20
>  #define MLX90614_OP_SLEEP      0xff
>
> +#define MLX90615_OP_EEPROM     0x10
> +#define MLX90615_OP_RAM                0x20
> +#define MLX90615_OP_SLEEP      0xc6
> +
>  /* Control bits in configuration register */
>  #define MLX90614_CONFIG_IIR_SHIFT 0 /* IIR coefficient */
>  #define MLX90614_CONFIG_IIR_MASK (0x7 << MLX90614_CONFIG_IIR_SHIFT)
> @@ -43,11 +50,16 @@
>  #define MLX90614_CONFIG_FIR_SHIFT 8 /* FIR coefficient */
>  #define MLX90614_CONFIG_FIR_MASK (0x7 << MLX90614_CONFIG_FIR_SHIFT)
>
> +#define MLX90615_CONFIG_IIR_SHIFT 12 /* IIR coefficient */
> +#define MLX90615_CONFIG_IIR_MASK (0x7 << MLX90615_CONFIG_IIR_SHIFT)
> +
>  /* Timings (in ms) */
>  #define MLX90614_TIMING_EEPROM 20 /* time for EEPROM write/erase to complete */
>  #define MLX90614_TIMING_WAKEUP 34 /* time to hold SDA low for wake-up */
>  #define MLX90614_TIMING_STARTUP 250 /* time before first data after wake-up */
>
> +#define MLX90615_TIMING_WAKEUP 22 /* time to hold SCL low for wake-up */
> +
>  #define MLX90614_AUTOSLEEP_DELAY 5000 /* default autosleep delay */
>
>  /* Magic constants */
> @@ -305,8 +317,8 @@ static int mlx90614_read_raw(struct iio_dev *indio_dev,
>                         *val2 = ret * NSEC_PER_SEC / chip_info->emissivity_max;
>                 }
>                 return IIO_VAL_INT_PLUS_NANO;
> -       case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: /* IIR setting with
> -                                                            FIR = 1024 */
> +       /* IIR setting with FIR=1024 (MLX90614) or FIR=65536 (MLX90615) */
> +       case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
>                 ret = mlx90614_power_get(data, false);
>                 if (ret < 0)
>                         return ret;
> @@ -664,14 +676,42 @@ static const struct mlx_chip_info mlx90614_chip_info = {
>         },
>  };
>
> +static const struct mlx_chip_info mlx90615_chip_info = {
> +       .op_eeprom_emissivity           = MLX90615_OP_EEPROM | 0x03,
> +       .op_eeprom_config1              = MLX90615_OP_EEPROM | 0x02,
> +       .op_ram_ta                      = MLX90615_OP_RAM | 0x06,
> +       .op_ram_tobj1                   = MLX90615_OP_RAM | 0x07,
> +       .op_ram_tobj2                   = MLX90615_OP_RAM | 0x08,
> +       .op_sleep                       = MLX90615_OP_SLEEP,
> +       .dual_channel                   = false,
> +       .wakeup_delay_ms                = MLX90615_TIMING_WAKEUP,
> +       .emissivity_max                 = 16383,
> +       .fir_config_mask                = 0,    /* MLX90615 FIR is fixed */
> +       .iir_config_mask                = MLX90615_CONFIG_IIR_MASK,
> +       /* IIR value 0 is FORBIDDEN COMBINATION on MLX90615 */
> +       .iir_valid_offset               = 1,
> +       .iir_values                     = { 500, 50, 30, 20, 15, 13, 10 },
> +       .iir_freqs                      = {
> +               { 0, 100000 },  /* 14% ~= 0.10 Hz */
> +               { 0, 130000 },  /* 17% ~= 0.13 Hz */
> +               { 0, 150000 },  /* 20% ~= 0.15 Hz */
> +               { 0, 200000 },  /* 25% ~= 0.20 Hz */
> +               { 0, 300000 },  /* 33% ~= 0.30 Hz */
> +               { 0, 500000 },  /* 50% ~= 0.50 Hz */
> +               { 5, 000000 },  /* 100% ~= 5.00 Hz */
> +       },
> +};
> +
>  static const struct i2c_device_id mlx90614_id[] = {
>         { "mlx90614", .driver_data = (kernel_ulong_t)&mlx90614_chip_info },
> +       { "mlx90615", .driver_data = (kernel_ulong_t)&mlx90615_chip_info },
>         { }
>  };
>  MODULE_DEVICE_TABLE(i2c, mlx90614_id);
>
>  static const struct of_device_id mlx90614_of_match[] = {
>         { .compatible = "melexis,mlx90614", .data = &mlx90614_chip_info },
> +       { .compatible = "melexis,mlx90615", .data = &mlx90615_chip_info },
>         { }
>  };
>  MODULE_DEVICE_TABLE(of, mlx90614_of_match);
> --
> 2.39.2
>



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux