Re: [PATCH 12/15] clk: nuvoton: Add clock driver for ma35d1 clock controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Dear Krzysztof,


On 2023/3/16 下午 03:51, Krzysztof Kozlowski wrote:
On 15/03/2023 08:28, Jacky Huang wrote:
From: Jacky Huang<ychuang3@xxxxxxxxxxx>

The clock controller generates clocks for the whole chip, including
system clocks and all peripheral clocks. This driver support ma35d1
clock gating, divider, and individual PLL configuration.

There are 6 PLLs in ma35d1 SoC:
   - CA-PLL for the two Cortex-A35 CPU clock
   - SYS-PLL for system bus, which comes from the companion MCU
     and cannot be programmed by clock controller.
   - DDR-PLL for DDR
   - EPLL for GMAC and GFX, Display, and VDEC IPs.
   - VPLL for video output pixel clock
   - APLL for SDHC, I2S audio, and other IPs.
CA-PLL has only one operation mode.
DDR-PLL, EPLL, VPLL, and APLL are advanced PLLs which have 3
operation modes: integer mode, fraction mode, and spread specturm mode.

Signed-off-by: Jacky Huang<ychuang3@xxxxxxxxxxx>
---
  drivers/clk/Makefile                     |   1 +
  drivers/clk/nuvoton/Makefile             |   4 +
  drivers/clk/nuvoton/clk-ma35d1-divider.c | 144 ++++
  drivers/clk/nuvoton/clk-ma35d1-pll.c     | 534 +++++++++++++
  drivers/clk/nuvoton/clk-ma35d1.c         | 970 +++++++++++++++++++++++
  drivers/clk/nuvoton/clk-ma35d1.h         | 198 +++++
  6 files changed, 1851 insertions(+)
  create mode 100644 drivers/clk/nuvoton/Makefile
  create mode 100644 drivers/clk/nuvoton/clk-ma35d1-divider.c
  create mode 100644 drivers/clk/nuvoton/clk-ma35d1-pll.c
  create mode 100644 drivers/clk/nuvoton/clk-ma35d1.c
  create mode 100644 drivers/clk/nuvoton/clk-ma35d1.h

diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index e3ca0d058a25..2e7916d269e1 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -103,6 +103,7 @@ endif
  obj-y					+= mstar/
  obj-y					+= mvebu/
  obj-$(CONFIG_ARCH_MXS)			+= mxs/
+obj-$(CONFIG_ARCH_NUVOTON)		+= nuvoton/
Missing compile test.

(...)


Thank you. We should have a Kconfig file in nuvoton directory.

I will a Kconfig file including COMPILE_TEST.


+
+MODULE_AUTHOR("Chi-Fang Li<cfli0@xxxxxxxxxxx>");
+MODULE_DESCRIPTION("NUVOTON MA35D1 Clock Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/clk/nuvoton/clk-ma35d1.h b/drivers/clk/nuvoton/clk-ma35d1.h
new file mode 100644
index 000000000000..faae5a17e425
--- /dev/null
+++ b/drivers/clk/nuvoton/clk-ma35d1.h
@@ -0,0 +1,198 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2023 Nuvoton Technology Corp.
+ * Author: Chi-Fang Li<cfli0@xxxxxxxxxxx>
+ */
+
+#ifndef __DRV_CLK_NUVOTON_MA35D1_H
+#define __DRV_CLK_NUVOTON_MA35D1_H
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/spinlock.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/ma35d1-sys.h>
+
+enum ma35d1_pll_type {
+	MA35D1_CAPLL,
+	MA35D1_DDRPLL,
+	MA35D1_APLL,
+	MA35D1_EPLL,
+	MA35D1_VPLL,
+};
+
+enum ma35d1_pll_mode {
+	VSIPLL_INTEGER_MODE,
+	VSIPLL_FRACTIONAL_MODE,
+	VSIPLL_SS_MODE,
+};
+
+/* VSI-PLL CTL0~2 */
+#define VSIPLL_CTL0			0x0
+#define VSIPLL_CTL1			0x4
+#define VSIPLL_CTL2			0x8
+
+/* VSI-PLL Specification limits */
+#define VSIPLL_FREF_MAX_FREQ		200000000UL
+#define VSIPLL_FREF_MIN_FREQ		1000000UL
+#define VSIPLL_FREFDIVM_MAX_FREQ	40000000UL
+#define VSIPLL_FREFDIVM_MIN_FREQ0	1000000UL
+#define VSIPLL_FREFDIVM_MIN_FREQ1	10000000UL
+#define VSIPLL_FCLK_MAX_FREQ		2400000000UL
+#define VSIPLL_FCLK_MIN_FREQ		600000000UL
+#define VSIPLL_FCLKO_MAX_FREQ		2400000000UL
+#define VSIPLL_FCLKO_MIN_FREQ		85700000UL
+#define VSIPLL_SPREAD_RANGE		194
+#define VSIPLL_MODULATION_FREQ		50000
+
+/* Clock Control Registers Offset */
+#define REG_CLK_PWRCTL			(0x00)
+#define REG_CLK_SYSCLK0			(0x04)
+#define REG_CLK_SYSCLK1			(0x08)
+#define REG_CLK_APBCLK0			(0x0C)
+#define REG_CLK_APBCLK1			(0x10)
+#define REG_CLK_APBCLK2			(0x14)
+#define REG_CLK_CLKSEL0			(0x18)
+#define REG_CLK_CLKSEL1			(0x1C)
+#define REG_CLK_CLKSEL2			(0x20)
+#define REG_CLK_CLKSEL3			(0x24)
+#define REG_CLK_CLKSEL4			(0x28)
+#define REG_CLK_CLKDIV0			(0x2C)
+#define REG_CLK_CLKDIV1			(0x30)
+#define REG_CLK_CLKDIV2			(0x34)
+#define REG_CLK_CLKDIV3			(0x38)
+#define REG_CLK_CLKDIV4			(0x3C)
+#define REG_CLK_CLKOCTL			(0x40)
+#define REG_CLK_STATUS			(0x50)
+#define REG_CLK_PLL0CTL0		(0x60)
+#define REG_CLK_PLL2CTL0		(0x80)
+#define REG_CLK_PLL2CTL1		(0x84)
+#define REG_CLK_PLL2CTL2		(0x88)
+#define REG_CLK_PLL3CTL0		(0x90)
+#define REG_CLK_PLL3CTL1		(0x94)
+#define REG_CLK_PLL3CTL2		(0x98)
+#define REG_CLK_PLL4CTL0		(0xA0)
+#define REG_CLK_PLL4CTL1		(0xA4)
+#define REG_CLK_PLL4CTL2		(0xA8)
+#define REG_CLK_PLL5CTL0		(0xB0)
+#define REG_CLK_PLL5CTL1		(0xB4)
+#define REG_CLK_PLL5CTL2		(0xB8)
+#define REG_CLK_CLKDCTL			(0xC0)
+#define REG_CLK_CLKDSTS			(0xC4)
+#define REG_CLK_CDUPB			(0xC8)
+#define REG_CLK_CDLOWB			(0xCC)
+#define REG_CLK_CKFLTRCTL		(0xD0)
+#define REG_CLK_TESTCLK			(0xF0)
+#define REG_CLK_PLLCTL			(0x40)
+
+/* Constant Definitions for Clock Controller */
+#define SMICPLLCTL0_FBDIV_POS		(0)
+#define SMICPLLCTL0_FBDIV_MSK		(0xfful << SMICPLLCTL0_FBDIV_POS)
+#define SMICPLLCTL0_INDIV_POS		(8)
+#define SMICPLLCTL0_INDIV_MSK		(0xful << SMICPLLCTL0_INDIV_POS)
+#define SMICPLLCTL0_OUTDIV_POS		(12)
+#define SMICPLLCTL0_OUTDIV_MSK		(0x3ul << SMICPLLCTL0_OUTDIV_POS)
+#define SMICPLLCTL0_PD_POS		(16)
+#define SMICPLLCTL0_PD_MSK		(0x1ul << SMICPLLCTL0_PD_POS)
+#define SMICPLLCTL0_BP_POS		(17)
+#define SMICPLLCTL0_BP_MSK		(0x1ul << SMICPLLCTL0_BP_POS)
+#define VSIPLLCTL0_FBDIV_POS		(0)
+#define VSIPLLCTL0_FBDIV_MSK		(0x7fful << VSIPLLCTL0_FBDIV_POS)
+#define VSIPLLCTL0_INDIV_POS		(12)
+#define VSIPLLCTL0_INDIV_MSK		(0x3ful << VSIPLLCTL0_INDIV_POS)
+#define VSIPLLCTL0_MODE_POS		(18)
+#define VSIPLLCTL0_MODE_MSK		(0x3ul << VSIPLLCTL0_MODE_POS)
+#define VSIPLLCTL0_SSRATE_POS		(20)
+#define VSIPLLCTL0_SSRATE_MSK		(0x7fful << VSIPLLCTL0_SSRATE_POS)
+#define VSIPLLCTL1_PD_POS		(0)
+#define VSIPLLCTL1_PD_MSK		(0x1ul << VSIPLLCTL1_PD_POS)
+#define VSIPLLCTL1_BP_POS		(1)
+#define VSIPLLCTL1_BP_MSK		(0x1ul << VSIPLLCTL1_BP_POS)
+#define VSIPLLCTL1_OUTDIV_POS		(4)
+#define VSIPLLCTL1_OUTDIV_MSK		(0x7ul << VSIPLLCTL1_OUTDIV_POS)
+#define VSIPLLCTL1_FRAC_POS		(8)
+#define VSIPLLCTL1_FRAC_MSK		(0xfffffful << VSIPLLCTL1_FRAC_POS)
+#define VSIPLLCTL2_SLOPE_POS		(0)
+#define VSIPLLCTL2_SLOPE_MSK		(0xfffffful << VSIPLLCTL2_SLOPE_POS)
+
+struct clk_hw *ma35d1_reg_clk_pll(enum ma35d1_pll_type type, u8 u8mode,
+				 const char *name, const char *parent,
+				 unsigned long targetFreq,
+				 void __iomem *base,
+				 struct regmap *regmap);
+
+struct clk_hw *ma35d1_reg_adc_clkdiv(struct device *dev,
+				    const char *name,
+				    const char *parent_name,
+				    unsigned long flags,
+				    void __iomem *reg, u8 shift,
+				    u8 width, u32 mask_bit);
+
+extern spinlock_t ma35d1_lock;
Why this is here?


We will remove it and use "static DEFINE_SPINLOCK(ma35d1_lock);"

and have it used in clk-ma35d1-divider.c only.


+
+static inline struct clk_hw *ma35d1_clk_fixed(const char *name, int rate)
+{
+	return clk_hw_register_fixed_rate(NULL, name, NULL, 0, rate);
+}
+
Why all these are here?


These should be static functions in clk-ma35d1.c.

We will move these function to the C file in next version.


+
+#endif /* __DRV_CLK_NUVOTON_MA35D1_H */
Best regards,
Krzysztof


Best regards,

Jacky Huang





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux