Re: [PATCH 12/15] clk: nuvoton: Add clock driver for ma35d1 clock controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 15/03/2023 08:28, Jacky Huang wrote:
> From: Jacky Huang <ychuang3@xxxxxxxxxxx>
> 
> The clock controller generates clocks for the whole chip, including
> system clocks and all peripheral clocks. This driver support ma35d1
> clock gating, divider, and individual PLL configuration.
> 
> There are 6 PLLs in ma35d1 SoC:
>   - CA-PLL for the two Cortex-A35 CPU clock
>   - SYS-PLL for system bus, which comes from the companion MCU
>     and cannot be programmed by clock controller.
>   - DDR-PLL for DDR
>   - EPLL for GMAC and GFX, Display, and VDEC IPs.
>   - VPLL for video output pixel clock
>   - APLL for SDHC, I2S audio, and other IPs.
> CA-PLL has only one operation mode.
> DDR-PLL, EPLL, VPLL, and APLL are advanced PLLs which have 3
> operation modes: integer mode, fraction mode, and spread specturm mode.
> 
> Signed-off-by: Jacky Huang <ychuang3@xxxxxxxxxxx>
> ---
>  drivers/clk/Makefile                     |   1 +
>  drivers/clk/nuvoton/Makefile             |   4 +
>  drivers/clk/nuvoton/clk-ma35d1-divider.c | 144 ++++
>  drivers/clk/nuvoton/clk-ma35d1-pll.c     | 534 +++++++++++++
>  drivers/clk/nuvoton/clk-ma35d1.c         | 970 +++++++++++++++++++++++
>  drivers/clk/nuvoton/clk-ma35d1.h         | 198 +++++
>  6 files changed, 1851 insertions(+)
>  create mode 100644 drivers/clk/nuvoton/Makefile
>  create mode 100644 drivers/clk/nuvoton/clk-ma35d1-divider.c
>  create mode 100644 drivers/clk/nuvoton/clk-ma35d1-pll.c
>  create mode 100644 drivers/clk/nuvoton/clk-ma35d1.c
>  create mode 100644 drivers/clk/nuvoton/clk-ma35d1.h
> 
> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> index e3ca0d058a25..2e7916d269e1 100644
> --- a/drivers/clk/Makefile
> +++ b/drivers/clk/Makefile
> @@ -103,6 +103,7 @@ endif
>  obj-y					+= mstar/
>  obj-y					+= mvebu/
>  obj-$(CONFIG_ARCH_MXS)			+= mxs/
> +obj-$(CONFIG_ARCH_NUVOTON)		+= nuvoton/

Missing compile test.

(...)

> +
> +MODULE_AUTHOR("Chi-Fang Li<cfli0@xxxxxxxxxxx>");
> +MODULE_DESCRIPTION("NUVOTON MA35D1 Clock Driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/clk/nuvoton/clk-ma35d1.h b/drivers/clk/nuvoton/clk-ma35d1.h
> new file mode 100644
> index 000000000000..faae5a17e425
> --- /dev/null
> +++ b/drivers/clk/nuvoton/clk-ma35d1.h
> @@ -0,0 +1,198 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (C) 2023 Nuvoton Technology Corp.
> + * Author: Chi-Fang Li <cfli0@xxxxxxxxxxx>
> + */
> +
> +#ifndef __DRV_CLK_NUVOTON_MA35D1_H
> +#define __DRV_CLK_NUVOTON_MA35D1_H
> +
> +#include <linux/clk.h>
> +#include <linux/clkdev.h>
> +#include <linux/clk-provider.h>
> +#include <linux/spinlock.h>
> +#include <linux/regmap.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/mfd/ma35d1-sys.h>
> +
> +enum ma35d1_pll_type {
> +	MA35D1_CAPLL,
> +	MA35D1_DDRPLL,
> +	MA35D1_APLL,
> +	MA35D1_EPLL,
> +	MA35D1_VPLL,
> +};
> +
> +enum ma35d1_pll_mode {
> +	VSIPLL_INTEGER_MODE,
> +	VSIPLL_FRACTIONAL_MODE,
> +	VSIPLL_SS_MODE,
> +};
> +
> +/* VSI-PLL CTL0~2 */
> +#define VSIPLL_CTL0			0x0
> +#define VSIPLL_CTL1			0x4
> +#define VSIPLL_CTL2			0x8
> +
> +/* VSI-PLL Specification limits */
> +#define VSIPLL_FREF_MAX_FREQ		200000000UL
> +#define VSIPLL_FREF_MIN_FREQ		1000000UL
> +#define VSIPLL_FREFDIVM_MAX_FREQ	40000000UL
> +#define VSIPLL_FREFDIVM_MIN_FREQ0	1000000UL
> +#define VSIPLL_FREFDIVM_MIN_FREQ1	10000000UL
> +#define VSIPLL_FCLK_MAX_FREQ		2400000000UL
> +#define VSIPLL_FCLK_MIN_FREQ		600000000UL
> +#define VSIPLL_FCLKO_MAX_FREQ		2400000000UL
> +#define VSIPLL_FCLKO_MIN_FREQ		85700000UL
> +#define VSIPLL_SPREAD_RANGE		194
> +#define VSIPLL_MODULATION_FREQ		50000
> +
> +/* Clock Control Registers Offset */
> +#define REG_CLK_PWRCTL			(0x00)
> +#define REG_CLK_SYSCLK0			(0x04)
> +#define REG_CLK_SYSCLK1			(0x08)
> +#define REG_CLK_APBCLK0			(0x0C)
> +#define REG_CLK_APBCLK1			(0x10)
> +#define REG_CLK_APBCLK2			(0x14)
> +#define REG_CLK_CLKSEL0			(0x18)
> +#define REG_CLK_CLKSEL1			(0x1C)
> +#define REG_CLK_CLKSEL2			(0x20)
> +#define REG_CLK_CLKSEL3			(0x24)
> +#define REG_CLK_CLKSEL4			(0x28)
> +#define REG_CLK_CLKDIV0			(0x2C)
> +#define REG_CLK_CLKDIV1			(0x30)
> +#define REG_CLK_CLKDIV2			(0x34)
> +#define REG_CLK_CLKDIV3			(0x38)
> +#define REG_CLK_CLKDIV4			(0x3C)
> +#define REG_CLK_CLKOCTL			(0x40)
> +#define REG_CLK_STATUS			(0x50)
> +#define REG_CLK_PLL0CTL0		(0x60)
> +#define REG_CLK_PLL2CTL0		(0x80)
> +#define REG_CLK_PLL2CTL1		(0x84)
> +#define REG_CLK_PLL2CTL2		(0x88)
> +#define REG_CLK_PLL3CTL0		(0x90)
> +#define REG_CLK_PLL3CTL1		(0x94)
> +#define REG_CLK_PLL3CTL2		(0x98)
> +#define REG_CLK_PLL4CTL0		(0xA0)
> +#define REG_CLK_PLL4CTL1		(0xA4)
> +#define REG_CLK_PLL4CTL2		(0xA8)
> +#define REG_CLK_PLL5CTL0		(0xB0)
> +#define REG_CLK_PLL5CTL1		(0xB4)
> +#define REG_CLK_PLL5CTL2		(0xB8)
> +#define REG_CLK_CLKDCTL			(0xC0)
> +#define REG_CLK_CLKDSTS			(0xC4)
> +#define REG_CLK_CDUPB			(0xC8)
> +#define REG_CLK_CDLOWB			(0xCC)
> +#define REG_CLK_CKFLTRCTL		(0xD0)
> +#define REG_CLK_TESTCLK			(0xF0)
> +#define REG_CLK_PLLCTL			(0x40)
> +
> +/* Constant Definitions for Clock Controller */
> +#define SMICPLLCTL0_FBDIV_POS		(0)
> +#define SMICPLLCTL0_FBDIV_MSK		(0xfful << SMICPLLCTL0_FBDIV_POS)
> +#define SMICPLLCTL0_INDIV_POS		(8)
> +#define SMICPLLCTL0_INDIV_MSK		(0xful << SMICPLLCTL0_INDIV_POS)
> +#define SMICPLLCTL0_OUTDIV_POS		(12)
> +#define SMICPLLCTL0_OUTDIV_MSK		(0x3ul << SMICPLLCTL0_OUTDIV_POS)
> +#define SMICPLLCTL0_PD_POS		(16)
> +#define SMICPLLCTL0_PD_MSK		(0x1ul << SMICPLLCTL0_PD_POS)
> +#define SMICPLLCTL0_BP_POS		(17)
> +#define SMICPLLCTL0_BP_MSK		(0x1ul << SMICPLLCTL0_BP_POS)
> +#define VSIPLLCTL0_FBDIV_POS		(0)
> +#define VSIPLLCTL0_FBDIV_MSK		(0x7fful << VSIPLLCTL0_FBDIV_POS)
> +#define VSIPLLCTL0_INDIV_POS		(12)
> +#define VSIPLLCTL0_INDIV_MSK		(0x3ful << VSIPLLCTL0_INDIV_POS)
> +#define VSIPLLCTL0_MODE_POS		(18)
> +#define VSIPLLCTL0_MODE_MSK		(0x3ul << VSIPLLCTL0_MODE_POS)
> +#define VSIPLLCTL0_SSRATE_POS		(20)
> +#define VSIPLLCTL0_SSRATE_MSK		(0x7fful << VSIPLLCTL0_SSRATE_POS)
> +#define VSIPLLCTL1_PD_POS		(0)
> +#define VSIPLLCTL1_PD_MSK		(0x1ul << VSIPLLCTL1_PD_POS)
> +#define VSIPLLCTL1_BP_POS		(1)
> +#define VSIPLLCTL1_BP_MSK		(0x1ul << VSIPLLCTL1_BP_POS)
> +#define VSIPLLCTL1_OUTDIV_POS		(4)
> +#define VSIPLLCTL1_OUTDIV_MSK		(0x7ul << VSIPLLCTL1_OUTDIV_POS)
> +#define VSIPLLCTL1_FRAC_POS		(8)
> +#define VSIPLLCTL1_FRAC_MSK		(0xfffffful << VSIPLLCTL1_FRAC_POS)
> +#define VSIPLLCTL2_SLOPE_POS		(0)
> +#define VSIPLLCTL2_SLOPE_MSK		(0xfffffful << VSIPLLCTL2_SLOPE_POS)
> +
> +struct clk_hw *ma35d1_reg_clk_pll(enum ma35d1_pll_type type, u8 u8mode,
> +				 const char *name, const char *parent,
> +				 unsigned long targetFreq,
> +				 void __iomem *base,
> +				 struct regmap *regmap);
> +
> +struct clk_hw *ma35d1_reg_adc_clkdiv(struct device *dev,
> +				    const char *name,
> +				    const char *parent_name,
> +				    unsigned long flags,
> +				    void __iomem *reg, u8 shift,
> +				    u8 width, u32 mask_bit);
> +
> +extern spinlock_t ma35d1_lock;

Why this is here?

> +
> +static inline struct clk_hw *ma35d1_clk_fixed(const char *name, int rate)
> +{
> +	return clk_hw_register_fixed_rate(NULL, name, NULL, 0, rate);
> +}
> +

Why all these are here?

> +
> +#endif /* __DRV_CLK_NUVOTON_MA35D1_H */

Best regards,
Krzysztof




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux