Hi Andreas, On 22-10-26, Andreas Kemnade wrote: > Add the touchscreen now, since the driver is available. I pulled input/next and grep'ed for the compatible but found nothing. Where should the driver be available? Regards, Marco > Signed-off-by: Andreas Kemnade <andreas@xxxxxxxxxxxx> > --- > runtime/dtbs_check depends > https://lore.kernel.org/linux-devicetree/20221026114908.191472-1-alistair@xxxxxxxxxxxxx/T/#t > arch/arm/boot/dts/e60k02.dtsi | 12 +++++++++++- > arch/arm/boot/dts/imx6sl-tolino-shine3.dts | 14 ++++++++++++++ > arch/arm/boot/dts/imx6sll-kobo-clarahd.dts | 14 ++++++++++++++ > 3 files changed, 39 insertions(+), 1 deletion(-) > > diff --git a/arch/arm/boot/dts/e60k02.dtsi b/arch/arm/boot/dts/e60k02.dtsi > index 935e2359f8df..4f36cc181a52 100644 > --- a/arch/arm/boot/dts/e60k02.dtsi > +++ b/arch/arm/boot/dts/e60k02.dtsi > @@ -104,7 +104,17 @@ &i2c2 { > clock-frequency = <100000>; > status = "okay"; > > - /* TODO: CYTTSP5 touch controller at 0x24 */ > + touchscreen@24 { > + compatible = "cypress,tt21000"; > + reg = <0x24>; > + pinctrl-names = "default","sleep"; Does the driver handle the different states? > + pinctrl-0 = <&pinctrl_cyttsp5_gpio>; > + pinctrl-1 = <&pinctrl_cyttsp5_gpio_sleep>; > + interrupt-parent = <&gpio5>; > + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; > + reset-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; > + vdd-supply = <&ldo5_reg>; > + }; > > /* TODO: TPS65185 PMIC for E Ink at 0x68 */ > > diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine3.dts b/arch/arm/boot/dts/imx6sl-tolino-shine3.dts > index e3f1e8d79528..82d9ed91df92 100644 > --- a/arch/arm/boot/dts/imx6sl-tolino-shine3.dts > +++ b/arch/arm/boot/dts/imx6sl-tolino-shine3.dts > @@ -52,6 +52,20 @@ &iomuxc { > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_hog>; > > + pinctrl_cyttsp5_gpio: cyttsp5_gpio_grp { According the below code it should be: pinctrl_cyttsp5_gpio: cyttsp5-gpiogrp { and.. > + fsl,pins = < > + MX6SL_PAD_SD1_DAT3__GPIO5_IO06 0x17059 /* TP_INT */ > + MX6SL_PAD_SD1_DAT2__GPIO5_IO13 0x10059 /* TP_RST */ > + >; > + }; > + > + pinctrl_cyttsp5_gpio_sleep: cyttsp5_gpio_grp_sleep { pinctrl_cyttsp5_gpio_sleep: cyttsp5-gpio-sleepgrp { Regards, Marco > + fsl,pins = < > + MX6SL_PAD_SD1_DAT3__GPIO5_IO06 0x10059 /* TP_INT */ > + MX6SL_PAD_SD1_DAT2__GPIO5_IO13 0x10059 /* TP_RST */ > + >; > + }; > + > pinctrl_gpio_keys: gpio-keysgrp { > fsl,pins = < > MX6SL_PAD_SD1_DAT1__GPIO5_IO08 0x17059 /* PWR_SW */ > diff --git a/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts b/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts > index 90b32f5eb529..d743bf4fd8e6 100644 > --- a/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts > +++ b/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts > @@ -62,6 +62,20 @@ &iomuxc { > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_hog>; > > + pinctrl_cyttsp5_gpio: cyttsp5-gpiogrp { > + fsl,pins = < > + MX6SLL_PAD_SD1_DATA3__GPIO5_IO06 0x17059 /* TP_INT */ > + MX6SLL_PAD_SD1_DATA2__GPIO5_IO13 0x10059 /* TP_RST */ > + >; > + }; > + > + pinctrl_cyttsp5_gpio_sleep: cyttsp5-gpiogrp-sleep { > + fsl,pins = < > + MX6SLL_PAD_SD1_DATA3__GPIO5_IO06 0x10059 /* TP_INT */ > + MX6SLL_PAD_SD1_DATA2__GPIO5_IO13 0x10059 /* TP_RST */ > + >; > + }; > + > pinctrl_gpio_keys: gpio-keysgrp { > fsl,pins = < > MX6SLL_PAD_SD1_DATA1__GPIO5_IO08 0x17059 /* PWR_SW */ > -- > 2.30.2 > > >
