Enable sgpio node on pcb8291 as this is needed to be able to control the LEDs on this board. Otherwise the LEDs support on the board will not be available. On the other board pcb8309 the sgpio is already enabled because it needed to access the SFP ports. Fixes: 0b7baa1a307f ("ARM: dts: lan966x: add led configuration") Signed-off-by: Horatiu Vultur <horatiu.vultur@xxxxxxxxxxxxx> --- v1->v2: - add fixes tag --- arch/arm/boot/dts/lan966x-pcb8291.dts | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/arch/arm/boot/dts/lan966x-pcb8291.dts b/arch/arm/boot/dts/lan966x-pcb8291.dts index f4f054cdf2a87..3a3d76af86122 100644 --- a/arch/arm/boot/dts/lan966x-pcb8291.dts +++ b/arch/arm/boot/dts/lan966x-pcb8291.dts @@ -69,6 +69,12 @@ can0_b_pins: can0-b-pins { pins = "GPIO_35", "GPIO_36"; function = "can0_b"; }; + + sgpio_a_pins: sgpio-a-pins { + /* SCK, D0, D1, LD */ + pins = "GPIO_32", "GPIO_33", "GPIO_34", "GPIO_35"; + function = "sgpio_a"; + }; }; &can0 { @@ -118,6 +124,20 @@ &serdes { status = "okay"; }; +&sgpio { + pinctrl-0 = <&sgpio_a_pins>; + pinctrl-names = "default"; + microchip,sgpio-port-ranges = <0 3>, <8 11>; + status = "okay"; + + gpio@0 { + ngpios = <64>; + }; + gpio@1 { + ngpios = <64>; + }; +}; + &switch { status = "okay"; }; -- 2.38.0