Hi Marco, Am Wed, 26 Oct 2022 19:43:00 +0200 schrieb Marco Felsch <m.felsch@xxxxxxxxxxxxxx>: > Hi Andreas, > > On 22-10-26, Andreas Kemnade wrote: > > Add the touchscreen now, since the driver is available. > > I pulled input/next and grep'ed for the compatible but found nothing. > Where should the driver be available? now it is in input/next, so time to clean up this one here, too. > Regards, > Marco > > > Signed-off-by: Andreas Kemnade <andreas@xxxxxxxxxxxx> > > --- > > runtime/dtbs_check depends > > https://lore.kernel.org/linux-devicetree/20221026114908.191472-1-alistair@xxxxxxxxxxxxx/T/#t > > arch/arm/boot/dts/e60k02.dtsi | 12 +++++++++++- > > arch/arm/boot/dts/imx6sl-tolino-shine3.dts | 14 ++++++++++++++ > > arch/arm/boot/dts/imx6sll-kobo-clarahd.dts | 14 ++++++++++++++ > > 3 files changed, 39 insertions(+), 1 deletion(-) > > > > diff --git a/arch/arm/boot/dts/e60k02.dtsi > > b/arch/arm/boot/dts/e60k02.dtsi index 935e2359f8df..4f36cc181a52 > > 100644 --- a/arch/arm/boot/dts/e60k02.dtsi > > +++ b/arch/arm/boot/dts/e60k02.dtsi > > @@ -104,7 +104,17 @@ &i2c2 { > > clock-frequency = <100000>; > > status = "okay"; > > > > - /* TODO: CYTTSP5 touch controller at 0x24 */ > > + touchscreen@24 { > > + compatible = "cypress,tt21000"; > > + reg = <0x24>; > > + pinctrl-names = "default","sleep"; > > Does the driver handle the different states? > Well, apparently not, just copied it over from vendor kernel driver which also does not handle that... So just leaving it out for now. Regards, Andreas
