Hi Marco, On Wed, 26 Oct 2022 19:43:00 +0200 Marco Felsch <m.felsch@xxxxxxxxxxxxxx> wrote: > Hi Andreas, > > On 22-10-26, Andreas Kemnade wrote: > > Add the touchscreen now, since the driver is available. > > I pulled input/next and grep'ed for the compatible but found nothing. > Where should the driver be available? > Copying the link again. I have the guts feeling that it is near being accepted: https://lore.kernel.org/linux-devicetree/20221026114908.191472-1-alistair@xxxxxxxxxxxxx/T/#t Regards, Andreas > Regards, > Marco > > > Signed-off-by: Andreas Kemnade <andreas@xxxxxxxxxxxx> > > --- > > runtime/dtbs_check depends > > https://lore.kernel.org/linux-devicetree/20221026114908.191472-1-alistair@xxxxxxxxxxxxx/T/#t > > arch/arm/boot/dts/e60k02.dtsi | 12 +++++++++++- > > arch/arm/boot/dts/imx6sl-tolino-shine3.dts | 14 ++++++++++++++ > > arch/arm/boot/dts/imx6sll-kobo-clarahd.dts | 14 ++++++++++++++ > > 3 files changed, 39 insertions(+), 1 deletion(-) > > > > diff --git a/arch/arm/boot/dts/e60k02.dtsi b/arch/arm/boot/dts/e60k02.dtsi > > index 935e2359f8df..4f36cc181a52 100644 > > --- a/arch/arm/boot/dts/e60k02.dtsi > > +++ b/arch/arm/boot/dts/e60k02.dtsi > > @@ -104,7 +104,17 @@ &i2c2 { > > clock-frequency = <100000>; > > status = "okay"; > > > > - /* TODO: CYTTSP5 touch controller at 0x24 */ > > + touchscreen@24 { > > + compatible = "cypress,tt21000"; > > + reg = <0x24>; > > + pinctrl-names = "default","sleep"; > > Does the driver handle the different states? > > > + pinctrl-0 = <&pinctrl_cyttsp5_gpio>; > > + pinctrl-1 = <&pinctrl_cyttsp5_gpio_sleep>; > > + interrupt-parent = <&gpio5>; > > + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; > > + reset-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; > > + vdd-supply = <&ldo5_reg>; > > + }; > > > > /* TODO: TPS65185 PMIC for E Ink at 0x68 */ > > > > diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine3.dts b/arch/arm/boot/dts/imx6sl-tolino-shine3.dts > > index e3f1e8d79528..82d9ed91df92 100644 > > --- a/arch/arm/boot/dts/imx6sl-tolino-shine3.dts > > +++ b/arch/arm/boot/dts/imx6sl-tolino-shine3.dts > > @@ -52,6 +52,20 @@ &iomuxc { > > pinctrl-names = "default"; > > pinctrl-0 = <&pinctrl_hog>; > > > > + pinctrl_cyttsp5_gpio: cyttsp5_gpio_grp { > > According the below code it should be: > pinctrl_cyttsp5_gpio: cyttsp5-gpiogrp { > > and.. > > > + fsl,pins = < > > + MX6SL_PAD_SD1_DAT3__GPIO5_IO06 0x17059 /* TP_INT */ > > + MX6SL_PAD_SD1_DAT2__GPIO5_IO13 0x10059 /* TP_RST */ > > + >; > > + }; > > + > > + pinctrl_cyttsp5_gpio_sleep: cyttsp5_gpio_grp_sleep { > > > pinctrl_cyttsp5_gpio_sleep: cyttsp5-gpio-sleepgrp { > > > Regards, > Marco > > > + fsl,pins = < > > + MX6SL_PAD_SD1_DAT3__GPIO5_IO06 0x10059 /* TP_INT */ > > + MX6SL_PAD_SD1_DAT2__GPIO5_IO13 0x10059 /* TP_RST */ > > + >; > > + }; > > + > > pinctrl_gpio_keys: gpio-keysgrp { > > fsl,pins = < > > MX6SL_PAD_SD1_DAT1__GPIO5_IO08 0x17059 /* PWR_SW */ > > diff --git a/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts b/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts > > index 90b32f5eb529..d743bf4fd8e6 100644 > > --- a/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts > > +++ b/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts > > @@ -62,6 +62,20 @@ &iomuxc { > > pinctrl-names = "default"; > > pinctrl-0 = <&pinctrl_hog>; > > > > + pinctrl_cyttsp5_gpio: cyttsp5-gpiogrp { > > + fsl,pins = < > > + MX6SLL_PAD_SD1_DATA3__GPIO5_IO06 0x17059 /* TP_INT */ > > + MX6SLL_PAD_SD1_DATA2__GPIO5_IO13 0x10059 /* TP_RST */ > > + >; > > + }; > > + > > + pinctrl_cyttsp5_gpio_sleep: cyttsp5-gpiogrp-sleep { > > + fsl,pins = < > > + MX6SLL_PAD_SD1_DATA3__GPIO5_IO06 0x10059 /* TP_INT */ > > + MX6SLL_PAD_SD1_DATA2__GPIO5_IO13 0x10059 /* TP_RST */ > > + >; > > + }; > > + > > pinctrl_gpio_keys: gpio-keysgrp { > > fsl,pins = < > > MX6SLL_PAD_SD1_DATA1__GPIO5_IO08 0x17059 /* PWR_SW */ > > -- > > 2.30.2 > > > > > > >
