On Mon, 19 Sept 2022 at 19:06, Krzysztof Kozlowski
<krzysztof.kozlowski@xxxxxxxxxx> wrote:
>
> On 19/09/2022 16:31, Tomer Maimon wrote:
> >>>>> +examples:
> >>>>> + - |
> >>>>> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> >>>>> + #include <dt-bindings/gpio/gpio.h>
> >>>>> +
> >>>>> + soc {
> >>>>> + #address-cells = <2>;
> >>>>> + #size-cells = <2>;
> >>>>> +
> >>>>> + pinctrl: pinctrl@f0800000 {
> >>>>> + compatible = "nuvoton,npcm845-pinctrl";
> >>>>> + ranges = <0x0 0x0 0xf0010000 0x8000>;
> >>>>> + #address-cells = <1>;
> >>>>> + #size-cells = <1>;
> >>>>> + nuvoton,sysgcr = <&gcr>;
> >>>>> +
> >>>>> + gpio0: gpio@f0010000 {
> >>>>
> >>>> gpio@0
> >>>>
> >>>> Is this really a child block of the pinctrl? Doesn't really look like it
> >>>> based on addressess. Where are the pinctrl registers? In the sysgcr? If
> >>>> so, then pinctrl should be a child of it. But that doesn't really work
> >>>> too well with gpio child nodes...
> >>> the pin controller mux is handled by sysgcr this is why the sysgcr in
> >>> the mother node,
> >>> and the pin configuration are handled by the GPIO registers. each
> >>> GPIO bank (child) contains 32 GPIO.
> >>> this is why the GPIO is the child node.
> >>
> >> Then maybe pinctrl should be the sysgcr and expose regmap for other devices?
> > The pin controller using the sysgcr to handle the pinmux, this is why
> > the sysgcr is in the mother node, is it problematic?
>
> You said pin-controller mux registers are in sysgcr, so it should not be
> used via syscon.
Sorry but maybe I missed something.
the sysgcr is used for miscellaneous features and not only for the pin
controller mux, this is why it used syscon and defined in the dtsi:
gcr: system-controller@f0800000 {
compatible = "nuvoton,npcm845-gcr", "syscon";
reg = <0x0 0xf0800000 0x0 0x1000>;
};
>
> Please provide address map description to convince us that this is
> correct HW representation.
GCR (sysgcr) registers 0xf0800000-0xf0801000 - used for miscellaneous
features, not only pin mux.
GPIO0 0xf0010000-0xf0011000
GPIO1 0xf0011000-0xf0012000
...
GPIO7 0xf0017000-0xf0018000
>
> Best regards,
> Krzysztof
Best regards,
Tomer
