Hi Rob, Thanks for your comment and sorry for the late reply. On Tue, 19 Jul 2022 at 00:10, Rob Herring <robh@xxxxxxxxxx> wrote: > > On Thu, Jul 14, 2022 at 03:23:21PM +0300, Tomer Maimon wrote: > > Added device tree binding documentation for Nuvoton Arbel BMC NPCM8XX > > pinmux and GPIO controller. > > > > Signed-off-by: Tomer Maimon <tmaimon77@xxxxxxxxx> > > --- > > .../pinctrl/nuvoton,npcm845-pinctrl.yaml | 213 ++++++++++++++++++ > > 1 file changed, 213 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml > > > > diff --git a/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml > > new file mode 100644 > > index 000000000000..104766f7acc5 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml > > @@ -0,0 +1,213 @@ > > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/pinctrl/nuvoton,npcm845-pinctrl.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Nuvoton NPCM845 Pin Controller and GPIO > > + > > +maintainers: > > + - Tomer Maimon <tmaimon77@xxxxxxxxx> > > + > > +description: > > + The Nuvoton BMC NPCM8XX Pin Controller multi-function routed through > > + the multiplexing block, Each pin supports GPIO functionality (GPIOx) > > + and multiple functions that directly connect the pin to different > > + hardware blocks. > > + > > +properties: > > + compatible: > > + const: nuvoton,npcm845-pinctrl > > + > > + ranges: > > + maxItems: 1 > > + > > + '#address-cells': > > + const: 1 > > + > > + '#size-cells': > > + const: 1 > > + > > + nuvoton,sysgcr: > > + $ref: /schemas/types.yaml#/definitions/phandle > > + description: a phandle to access GCR registers. > > + > > +patternProperties: > > + "^gpio@": > > + type: object > > + > > + description: > > + Eight GPIO banks that each contain between 32 GPIOs. > > 'each contain between 32'? will be fixed net version. > > > + > > + properties: > > + gpio-controller: true > > + > > + '#gpio-cells': > > + const: 2 > > + > > + reg: > > + maxItems: 1 > > + > > + interrupts: > > + maxItems: 1 > > + > > + gpio-ranges: > > + maxItems: 1 > > + > > + required: > > + - gpio-controller > > + - '#gpio-cells' > > + - reg > > + - interrupts > > + - gpio-ranges > > + > > + "-mux": > > '-mux$'? Something like 'foo-muxbar' is needed? No. > > > + $ref: pinmux-node.yaml# > > + > > + properties: > > + groups: > > + description: > > + One or more groups of pins to mux to a certain function > > + items: > > + enum: [ iox1, iox2, smb1d, smb2d, lkgpo1, lkgpo2, ioxh, gspi, > > + smb5b, smb5c, lkgpo0, pspi2, jm1, jm2, smb4den, smb4b, > > + smb4c, smb15, smb16, smb17, smb18, smb19, smb20, smb21, > > + smb22, smb23, smb4d, smb14, smb5, smb4, smb3, spi0cs1, > > + spi0cs2, spi0cs3, smb3c, smb3b, bmcuart0a, uart1, jtag2, > > + bmcuart1, uart2, bmcuart0b, r1err, r1md, r1oen, r2oen, > > + rmii3, r3oen, smb3d, fanin0, fanin1, fanin2, fanin3, fanin4, > > + fanin5, fanin6, fanin7, fanin8, fanin9, fanin10, fanin11, > > + fanin12, fanin13, fanin14, fanin15, pwm0, pwm1, pwm2, pwm3, > > + r2, r2err, r2md, r3rxer, ga20kbc, smb5d, lpc, espi, rg1, > > + rg1mdio, rg2, ddr, i3c0, i3c1, i3c2, i3c3, i3c4, i3c5, > > + smb0, smb1, smb2, smb2c, smb2b, smb1c, smb1b, smb8, smb9, > > + smb10, smb11, sd1, sd1pwr, pwm4, pwm5, pwm6, pwm7, pwm8, > > + pwm9, pwm10, pwm11, mmc8, mmc, mmcwp, mmccd, mmcrst, clkout, > > + serirq, lpcclk, scipme, sci, smb6, smb7, spi1, faninx, r1, > > + spi3, spi3cs1, spi3quad, spi3cs2, spi3cs3, nprd_smi, smb0b, > > + smb0c, smb0den, smb0d, ddc, rg2mdio, wdog1, wdog2, smb12, > > + smb13, spix, spixcs1, clkreq, hgpio0, hgpio1, hgpio2, hgpio3, > > + hgpio4, hgpio5, hgpio6, hgpio7 ] > > + > > + function: > > + description: > > + The function that a group of pins is muxed to > > + enum: [ iox1, iox2, smb1d, smb2d, lkgpo1, lkgpo2, ioxh, gspi, > > + smb5b, smb5c, lkgpo0, pspi2, jm1, jm2, smb4den, smb4b, > > + smb4c, smb15, smb16, smb17, smb18, smb19, smb20, smb21, > > + smb22, smb23, smb4d, smb14, smb5, smb4, smb3, spi0cs1, > > + spi0cs2, spi0cs3, smb3c, smb3b, bmcuart0a, uart1, jtag2, > > + bmcuart1, uart2, bmcuart0b, r1err, r1md, r1oen, r2oen, > > + rmii3, r3oen, smb3d, fanin0, fanin1, fanin2, fanin3, fanin4, > > + fanin5, fanin6, fanin7, fanin8, fanin9, fanin10, fanin11, > > + fanin12, fanin13, fanin14, fanin15, pwm0, pwm1, pwm2, pwm3, > > + r2, r2err, r2md, r3rxer, ga20kbc, smb5d, lpc, espi, rg1, > > + rg1mdio, rg2, ddr, i3c0, i3c1, i3c2, i3c3, i3c4, i3c5, > > + smb0, smb1, smb2, smb2c, smb2b, smb1c, smb1b, smb8, smb9, > > + smb10, smb11, sd1, sd1pwr, pwm4, pwm5, pwm6, pwm7, pwm8, > > + pwm9, pwm10, pwm11, mmc8, mmc, mmcwp, mmccd, mmcrst, clkout, > > + serirq, lpcclk, scipme, sci, smb6, smb7, spi1, faninx, r1, > > + spi3, spi3cs1, spi3quad, spi3cs2, spi3cs3, nprd_smi, smb0b, > > + smb0c, smb0den, smb0d, ddc, rg2mdio, wdog1, wdog2, smb12, > > + smb13, spix, spixcs1, clkreq, hgpio0, hgpio1, hgpio2, hgpio3, > > + hgpio4, hgpio5, hgpio6, hgpio7 ] > > + > > + dependencies: > > + groups: [ function ] > > + function: [ groups ] > > + > > + additionalProperties: false > > + > > + "^pin": > > + $ref: pincfg-node.yaml# > > + > > + properties: > > + pins: > > + description: > > + A list of pins to configure in certain ways, such as enabling > > + debouncing > > + > > + bias-disable: true > > + > > + bias-pull-up: true > > + > > + bias-pull-down: true > > + > > + input-enable: true > > + > > + output-low: true > > + > > + output-high: true > > + > > + drive-push-pull: true > > + > > + drive-open-drain: true > > + > > + input-debounce: > > + description: > > + Debouncing periods in microseconds, one period per interrupt > > + bank found in the controller > > + $ref: /schemas/types.yaml#/definitions/uint32-array > > + minItems: 1 > > + maxItems: 4 > > + > > + slew-rate: > > + description: | > > + 0: Low rate > > + 1: High rate > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + enum: [0, 1] > > + > > + drive-strength: > > + enum: [ 0, 1, 2, 4, 8, 12 ] > > + > > + additionalProperties: false > > + > > +allOf: > > + - $ref: "pinctrl.yaml#" > > + > > +required: > > + - compatible > > + - ranges > > + - '#address-cells' > > + - '#size-cells' > > + - nuvoton,sysgcr > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + #include <dt-bindings/interrupt-controller/arm-gic.h> > > + #include <dt-bindings/gpio/gpio.h> > > + > > + soc { > > + #address-cells = <2>; > > + #size-cells = <2>; > > + > > + pinctrl: pinctrl@f0800000 { > > + compatible = "nuvoton,npcm845-pinctrl"; > > + ranges = <0x0 0x0 0xf0010000 0x8000>; > > + #address-cells = <1>; > > + #size-cells = <1>; > > + nuvoton,sysgcr = <&gcr>; > > + > > + gpio0: gpio@f0010000 { > > gpio@0 > > Is this really a child block of the pinctrl? Doesn't really look like it > based on addressess. Where are the pinctrl registers? In the sysgcr? If > so, then pinctrl should be a child of it. But that doesn't really work > too well with gpio child nodes... the pin controller mux is handled by sysgcr this is why the sysgcr in the mother node, and the pin configuration are handled by the GPIO registers. each GPIO bank (child) contains 32 GPIO. this is why the GPIO is the child node. > > Rob Best regards, Tomer
