Add basic support for pcb8290. It has 2 lan8814 phys(each phy is a
quad-port) on the external MDIO bus and no SFP ports.
Signed-off-by: Horatiu Vultur <horatiu.vultur@xxxxxxxxxxxxx>
---
v3->v4:
- add missing Copyright to dts file
v2->v3:
- update coma-mode-gpios, set them to OPEN_DRAIN
v1->v2:
- add comments for pps_out_pins and ptp_ext_pins pins
- fix commit message.
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/lan966x-pcb8290.dts | 175 ++++++++++++++++++++++++++
2 files changed, 176 insertions(+)
create mode 100644 arch/arm/boot/dts/lan966x-pcb8290.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 05d8aef6e5d2..595e870750cd 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -788,6 +788,7 @@ dtb-$(CONFIG_SOC_IMXRT) += \
dtb-$(CONFIG_SOC_LAN966) += \
lan966x-kontron-kswitch-d10-mmt-6g-2gs.dtb \
lan966x-kontron-kswitch-d10-mmt-8g.dtb \
+ lan966x-pcb8290.dtb \
lan966x-pcb8291.dtb \
lan966x-pcb8309.dtb
dtb-$(CONFIG_SOC_LS1021A) += \
diff --git a/arch/arm/boot/dts/lan966x-pcb8290.dts b/arch/arm/boot/dts/lan966x-pcb8290.dts
new file mode 100644
index 000000000000..2e091180a64c
--- /dev/null
+++ b/arch/arm/boot/dts/lan966x-pcb8290.dts
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * lan966x-pcb8290.dts - Device Tree file for LAN966X-PCB8290 board
+ *
+ * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Horatiu Vultur <horatiu.vultur@xxxxxxxxxxxxx>
+ */
+/dts-v1/;
+#include "lan966x.dtsi"
+#include "dt-bindings/phy/phy-lan966x-serdes.h"
+
+/ {
+ model = "Microchip EVB LAN9668";
+ compatible = "microchip,lan9668-pcb8290", "microchip,lan9668", "microchip,lan966";
+
+ gpio-restart {
+ compatible = "gpio-restart";
+ gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
+ priority = <200>;
+ };
+};
+
+&gpio {
+ miim_a_pins: mdio-pins {
+ /* MDC, MDIO */
+ pins = "GPIO_28", "GPIO_29";
+ function = "miim_a";
+ };
+
+ pps_out_pins: pps-out-pins {
+ /* 1pps output */
+ pins = "GPIO_38";
+ function = "ptpsync_3";
+ };
+
+ ptp_ext_pins: ptp-ext-pins {
+ /* 1pps input */
+ pins = "GPIO_35";
+ function = "ptpsync_0";
+ };
+
+ udc_pins: ucd-pins {
+ /* VBUS_DET B */
+ pins = "GPIO_8";
+ function = "usb_slave_b";
+ };
+};
+
+&mdio0 {
+ pinctrl-0 = <&miim_a_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ ext_phy0: ethernet-phy@7 {
+ reg = <7>;
+ coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+ };
+
+ ext_phy1: ethernet-phy@8 {
+ reg = <8>;
+ coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+ };
+
+ ext_phy2: ethernet-phy@9 {
+ reg = <9>;
+ coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+ };
+
+ ext_phy3: ethernet-phy@10 {
+ reg = <10>;
+ coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+ };
+
+ ext_phy4: ethernet-phy@15 {
+ reg = <15>;
+ coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+ };
+
+ ext_phy5: ethernet-phy@16 {
+ reg = <16>;
+ coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+ };
+
+ ext_phy6: ethernet-phy@17 {
+ reg = <17>;
+ coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+ };
+
+ ext_phy7: ethernet-phy@18 {
+ reg = <18>;
+ coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+ };
+};
+
+&port0 {
+ reg = <2>;
+ phy-handle = <&ext_phy2>;
+ phy-mode = "qsgmii";
+ phys = <&serdes 0 SERDES6G(1)>;
+ status = "okay";
+};
+
+&port1 {
+ reg = <3>;
+ phy-handle = <&ext_phy3>;
+ phy-mode = "qsgmii";
+ phys = <&serdes 1 SERDES6G(1)>;
+ status = "okay";
+};
+
+&port2 {
+ reg = <0>;
+ phy-handle = <&ext_phy0>;
+ phy-mode = "qsgmii";
+ phys = <&serdes 2 SERDES6G(1)>;
+ status = "okay";
+};
+
+&port3 {
+ reg = <1>;
+ phy-handle = <&ext_phy1>;
+ phy-mode = "qsgmii";
+ phys = <&serdes 3 SERDES6G(1)>;
+ status = "okay";
+};
+
+&port4 {
+ reg = <6>;
+ phy-handle = <&ext_phy6>;
+ phy-mode = "qsgmii";
+ phys = <&serdes 4 SERDES6G(2)>;
+ status = "okay";
+};
+
+&port5 {
+ reg = <7>;
+ phy-handle = <&ext_phy7>;
+ phy-mode = "qsgmii";
+ phys = <&serdes 5 SERDES6G(2)>;
+ status = "okay";
+};
+
+&port6 {
+ reg = <4>;
+ phy-handle = <&ext_phy4>;
+ phy-mode = "qsgmii";
+ phys = <&serdes 6 SERDES6G(2)>;
+ status = "okay";
+};
+
+&port7 {
+ reg = <5>;
+ phy-handle = <&ext_phy5>;
+ phy-mode = "qsgmii";
+ phys = <&serdes 7 SERDES6G(2)>;
+ status = "okay";
+};
+
+&serdes {
+ status = "okay";
+};
+
+&switch {
+ pinctrl-0 = <&pps_out_pins>, <&ptp_ext_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&udc {
+ pinctrl-0 = <&udc_pins>;
+ pinctrl-names = "default";
+ atmel,vbus-gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
--
2.33.0
