On 25.08.2022 09:51, Horatiu Vultur wrote:
> Add basic support for pcb8290. It has 2 lan8814 phys(each phy is a
> quad-port) on the external MDIO bus and no SFP ports.
>
> Signed-off-by: Horatiu Vultur <horatiu.vultur@xxxxxxxxxxxxx>
Applied to at91-dt, thanks!
> ---
> v3->v4:
> - add missing Copyright to dts file
>
> v2->v3:
> - update coma-mode-gpios, set them to OPEN_DRAIN
>
> v1->v2:
> - add comments for pps_out_pins and ptp_ext_pins pins
> - fix commit message.
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/lan966x-pcb8290.dts | 175 ++++++++++++++++++++++++++
> 2 files changed, 176 insertions(+)
> create mode 100644 arch/arm/boot/dts/lan966x-pcb8290.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 05d8aef6e5d2..595e870750cd 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -788,6 +788,7 @@ dtb-$(CONFIG_SOC_IMXRT) += \
> dtb-$(CONFIG_SOC_LAN966) += \
> lan966x-kontron-kswitch-d10-mmt-6g-2gs.dtb \
> lan966x-kontron-kswitch-d10-mmt-8g.dtb \
> + lan966x-pcb8290.dtb \
> lan966x-pcb8291.dtb \
> lan966x-pcb8309.dtb
> dtb-$(CONFIG_SOC_LS1021A) += \
> diff --git a/arch/arm/boot/dts/lan966x-pcb8290.dts b/arch/arm/boot/dts/lan966x-pcb8290.dts
> new file mode 100644
> index 000000000000..2e091180a64c
> --- /dev/null
> +++ b/arch/arm/boot/dts/lan966x-pcb8290.dts
> @@ -0,0 +1,175 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * lan966x-pcb8290.dts - Device Tree file for LAN966X-PCB8290 board
> + *
> + * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
> + *
> + * Author: Horatiu Vultur <horatiu.vultur@xxxxxxxxxxxxx>
> + */
> +/dts-v1/;
> +#include "lan966x.dtsi"
> +#include "dt-bindings/phy/phy-lan966x-serdes.h"
> +
> +/ {
> + model = "Microchip EVB LAN9668";
> + compatible = "microchip,lan9668-pcb8290", "microchip,lan9668", "microchip,lan966";
> +
> + gpio-restart {
> + compatible = "gpio-restart";
> + gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
> + priority = <200>;
> + };
> +};
> +
> +&gpio {
> + miim_a_pins: mdio-pins {
> + /* MDC, MDIO */
> + pins = "GPIO_28", "GPIO_29";
> + function = "miim_a";
> + };
> +
> + pps_out_pins: pps-out-pins {
> + /* 1pps output */
> + pins = "GPIO_38";
> + function = "ptpsync_3";
> + };
> +
> + ptp_ext_pins: ptp-ext-pins {
> + /* 1pps input */
> + pins = "GPIO_35";
> + function = "ptpsync_0";
> + };
> +
> + udc_pins: ucd-pins {
> + /* VBUS_DET B */
> + pins = "GPIO_8";
> + function = "usb_slave_b";
> + };
> +};
> +
> +&mdio0 {
> + pinctrl-0 = <&miim_a_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> +
> + ext_phy0: ethernet-phy@7 {
> + reg = <7>;
> + coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
> + };
> +
> + ext_phy1: ethernet-phy@8 {
> + reg = <8>;
> + coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
> + };
> +
> + ext_phy2: ethernet-phy@9 {
> + reg = <9>;
> + coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
> + };
> +
> + ext_phy3: ethernet-phy@10 {
> + reg = <10>;
> + coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
> + };
> +
> + ext_phy4: ethernet-phy@15 {
> + reg = <15>;
> + coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
> + };
> +
> + ext_phy5: ethernet-phy@16 {
> + reg = <16>;
> + coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
> + };
> +
> + ext_phy6: ethernet-phy@17 {
> + reg = <17>;
> + coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
> + };
> +
> + ext_phy7: ethernet-phy@18 {
> + reg = <18>;
> + coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
> + };
> +};
> +
> +&port0 {
> + reg = <2>;
> + phy-handle = <&ext_phy2>;
> + phy-mode = "qsgmii";
> + phys = <&serdes 0 SERDES6G(1)>;
> + status = "okay";
> +};
> +
> +&port1 {
> + reg = <3>;
> + phy-handle = <&ext_phy3>;
> + phy-mode = "qsgmii";
> + phys = <&serdes 1 SERDES6G(1)>;
> + status = "okay";
> +};
> +
> +&port2 {
> + reg = <0>;
> + phy-handle = <&ext_phy0>;
> + phy-mode = "qsgmii";
> + phys = <&serdes 2 SERDES6G(1)>;
> + status = "okay";
> +};
> +
> +&port3 {
> + reg = <1>;
> + phy-handle = <&ext_phy1>;
> + phy-mode = "qsgmii";
> + phys = <&serdes 3 SERDES6G(1)>;
> + status = "okay";
> +};
> +
> +&port4 {
> + reg = <6>;
> + phy-handle = <&ext_phy6>;
> + phy-mode = "qsgmii";
> + phys = <&serdes 4 SERDES6G(2)>;
> + status = "okay";
> +};
> +
> +&port5 {
> + reg = <7>;
> + phy-handle = <&ext_phy7>;
> + phy-mode = "qsgmii";
> + phys = <&serdes 5 SERDES6G(2)>;
> + status = "okay";
> +};
> +
> +&port6 {
> + reg = <4>;
> + phy-handle = <&ext_phy4>;
> + phy-mode = "qsgmii";
> + phys = <&serdes 6 SERDES6G(2)>;
> + status = "okay";
> +};
> +
> +&port7 {
> + reg = <5>;
> + phy-handle = <&ext_phy5>;
> + phy-mode = "qsgmii";
> + phys = <&serdes 7 SERDES6G(2)>;
> + status = "okay";
> +};
> +
> +&serdes {
> + status = "okay";
> +};
> +
> +&switch {
> + pinctrl-0 = <&pps_out_pins>, <&ptp_ext_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> +
> +&udc {
> + pinctrl-0 = <&udc_pins>;
> + pinctrl-names = "default";
> + atmel,vbus-gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
> + status = "okay";
> +};
