Re: [PATCH 2/7] dt-bindings: phy: mediatek,tphy: add property to set pre-emphasis

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 22/08/2022 10:07, Chunfeng Yun wrote:
> On Fri, 2022-08-19 at 15:15 +0300, Krzysztof Kozlowski wrote:
>> On 19/08/2022 12:13, Chunfeng Yun wrote:
>>> Add a property to set usb2 phy's pre-emphasis.
>>>
>>> Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
>>> ---
>>>  Documentation/devicetree/bindings/phy/mediatek,tphy.yaml | 7
>>> +++++++
>>>  1 file changed, 7 insertions(+)
>>>
>>> diff --git
>>> a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
>>> b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
>>> index 848edfb1f677..aee2f3027371 100644
>>> --- a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
>>> +++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
>>> @@ -219,6 +219,13 @@ patternProperties:
>>>          minimum: 1
>>>          maximum: 15
>>>  
>>> +      mediatek,pre-emphasis:
>>> +        description:
>>> +          The selection of pre-emphasis (U2 phy)
>>> +        $ref: /schemas/types.yaml#/definitions/uint32
>>> +        minimum: 1
>>> +        maximum: 3
>>
>> Instead of hard-coding register values in bindings, you should rather
>> describe here feature/effect. If it is in units, use unit suffixes.
>> If
>> it is some choice, usually string enum is appropriate.
> How about changing description as bellow:
> 
> "The level of pre-emphasis, increases one level, boosts the relative
> amplitudes of signal's higher frequencies components about 4.16% (U2
> phy)"
> 

Still the question is what is the unit. 4.16%?

Best regards,
Krzysztof



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux