On Fri, 2022-08-19 at 15:15 +0300, Krzysztof Kozlowski wrote: > On 19/08/2022 12:13, Chunfeng Yun wrote: > > Add a property to set usb2 phy's pre-emphasis. > > > > Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx> > > --- > > Documentation/devicetree/bindings/phy/mediatek,tphy.yaml | 7 > > +++++++ > > 1 file changed, 7 insertions(+) > > > > diff --git > > a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml > > b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml > > index 848edfb1f677..aee2f3027371 100644 > > --- a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml > > +++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml > > @@ -219,6 +219,13 @@ patternProperties: > > minimum: 1 > > maximum: 15 > > > > + mediatek,pre-emphasis: > > + description: > > + The selection of pre-emphasis (U2 phy) > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + minimum: 1 > > + maximum: 3 > > Instead of hard-coding register values in bindings, you should rather > describe here feature/effect. If it is in units, use unit suffixes. > If > it is some choice, usually string enum is appropriate. How about changing description as bellow: "The level of pre-emphasis, increases one level, boosts the relative amplitudes of signal's higher frequencies components about 4.16% (U2 phy)" Thanks > > Best regards, > Krzysztof
