Make trivial changes on the binding. - Update title to include MT7531 switch. - Add me as a maintainer. List maintainers in alphabetical order by first name. - Add description to compatible strings. - Fix MCM description. mediatek,mcm is not used on MT7623NI. - Add description for reset-gpios. - Remove quotes from $ref: "dsa.yaml#". Signed-off-by: Arınç ÜNAL <arinc.unal@xxxxxxxxxx> --- .../bindings/net/dsa/mediatek,mt7530.yaml | 27 ++++++++++++++----- 1 file changed, 20 insertions(+), 7 deletions(-) diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml index 17ab6c69ecc7..541984a7d2d4 100644 --- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml +++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml @@ -4,12 +4,13 @@ $id: http://devicetree.org/schemas/net/dsa/mediatek,mt7530.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Mediatek MT7530 Ethernet switch +title: Mediatek MT7530 and MT7531 Ethernet Switches maintainers: - - Sean Wang <sean.wang@xxxxxxxxxxxx> + - Arınç ÜNAL <arinc.unal@xxxxxxxxxx> - Landen Chao <Landen.Chao@xxxxxxxxxxxx> - DENG Qingfang <dqfext@xxxxxxxxx> + - Sean Wang <sean.wang@xxxxxxxxxxxx> description: | Port 5 of mt7530 and mt7621 switch is muxed between: @@ -66,6 +67,14 @@ properties: - mediatek,mt7531 - mediatek,mt7621 + description: | + mediatek,mt7530: + For standalone MT7530 and multi-chip module MT7530 in MT7623AI SoC. + mediatek,mt7531: + For standalone MT7531. + mediatek,mt7621: + For multi-chip module MT7530 in MT7621AT, MT7621DAT and MT7621ST SoCs. + reg: maxItems: 1 @@ -79,7 +88,7 @@ properties: gpio-controller: type: boolean description: - if defined, MT7530's LED controller will run on GPIO mode. + If defined, MT7530's LED controller will run on GPIO mode. "#interrupt-cells": const: 1 @@ -98,11 +107,15 @@ properties: mediatek,mcm: type: boolean description: - if defined, indicates that either MT7530 is the part on multi-chip - module belong to MT7623A has or the remotely standalone chip as the - function MT7623N reference board provided for. + Used for MT7621AT, MT7621DAT, MT7621ST and MT7623AI SoCs which the MT7530 + switch is a part of the multi-chip module. reset-gpios: + description: + GPIO to reset the switch. Use this if mediatek,mcm is not used. + This property is optional because some boards share the reset line with + other components which makes it impossible to probe the switch if the + reset line is used. maxItems: 1 reset-names: @@ -148,7 +161,7 @@ required: - reg allOf: - - $ref: "dsa.yaml#" + - $ref: dsa.yaml# - if: required: - mediatek,mcm -- 2.34.1
