From: Jassi Brar <jaswinder.singh@xxxxxxxxxx>
The MHU secure interrupt exists physically but is missing in the DT node.
Specify the interrupt in DT node to fix a warning on Arm Juno board:
mhu@2b1f0000: interrupts: [[0, 36, 4], [0, 35, 4]] is too short
Signed-off-by: Jassi Brar <jaswinder.singh@xxxxxxxxxx>
---
arch/arm64/boot/dts/arm/juno-base.dtsi | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index f6c55877fbd94..3220a00e9500d 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -26,9 +26,11 @@ mailbox: mhu@2b1f0000 {
compatible = "arm,mhu", "arm,primecell";
reg = <0x0 0x2b1f0000 0x0 0x1000>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "mhu_lpri_rx",
- "mhu_hpri_rx";
+ "mhu_hpri_rx",
+ "mhu_secure_rx";
#mbox-cells = <1>;
clocks = <&soc_refclk100mhz>;
clock-names = "apb_pclk";
--
2.25.1
