Satya Priya (9): dt-bindings: mfd: pm8008: Add reset-gpios dt-bindings: mfd: pm8008: Change the address cells dt-bindings: mfd: pm8008: Add regulators for pm8008 mfd: pm8008: Add reset-gpios mfd: pm8008: Remove the regmap member from pm8008_data struct mfd: pm8008: Use i2c_new_dummy_device() API regulator: Add a regulator driver for the PM8008 PMIC arm64: dts: qcom: pm8008: Add base dts file arm64: dts: qcom: sc7280: Add pm8008 support for sc7280-idp .../devicetree/bindings/mfd/qcom,pm8008.yaml | 69 ++++++- arch/arm64/boot/dts/qcom/pm8008.dtsi | 54 +++++ arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 66 ++++++ drivers/mfd/qcom-pm8008.c | 60 ++++-- drivers/regulator/Kconfig | 9 + drivers/regulator/Makefile | 1 + drivers/regulator/qcom-pm8008-regulator.c | 225 +++++++++++++++++++++ include/linux/mfd/qcom_pm8008.h | 8 + 8 files changed, 474 insertions(+), 18 deletions(-) create mode 100644 arch/arm64/boot/dts/qcom/pm8008.dtsi create mode 100644 drivers/regulator/qcom-pm8008-regulator.c create mode 100644 include/linux/mfd/qcom_pm8008.h -- 2.7.4
