Add pm8008 infra and regulators support for sc7280 idp. Signed-off-by: Satya Priya <quic_c_skakit@xxxxxxxxxxx> Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx> --- Changes in V13: - None. Changes in V12: - None. Changes in V11: - Add ldos and parent supplies directly under pm8008@8 node. arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 66 ++++++++++++++++++++++++++++++++ 1 file changed, 66 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index 5eb6689..166812e 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -271,6 +271,63 @@ }; }; +pm8008_bus: &i2c1 { + status = "okay"; +}; + +#include "pm8008.dtsi" + +&pm8008 { + interrupt-parent = <&tlmm>; + interrupts = <24 IRQ_TYPE_EDGE_RISING>; + + pinctrl-names = "default"; + pinctrl-0 = <&pm8008_active>; + + reset-gpios = <&pm8350c_gpios 4 GPIO_ACTIVE_LOW>; + + vdd_l1_l2-supply = <&vreg_s8b_1p2>; + vdd_l3_l4-supply = <&vreg_s1b_1p8>; + vdd_l5-supply = <&vreg_bob>; + vdd_l6-supply = <&vreg_bob>; + vdd_l7-supply = <&vreg_bob>; +}; + +&pm8008_l1 { + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; +}; + +&pm8008_l2 { + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1250000>; +}; + +&pm8008_l3 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3000000>; +}; + +&pm8008_l4 { + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <1600000>; +}; + +&pm8008_l5 { + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <3000000>; +}; + +&pm8008_l6 { + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <3000000>; +}; + +&pm8008_l7 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3544000>; +}; + &qfprom { vcc-supply = <&vreg_l1c_1p8>; }; @@ -383,6 +440,15 @@ drive-strength = <2>; }; +&pm8350c_gpios { + pm8008_active: pm8008-active { + pins = "gpio4"; + function = "normal"; + bias-disable; + power-source = <0>; + }; +}; + &qspi_cs0 { bias-disable; }; -- 2.7.4