Add base DTS file for pm8008.
Signed-off-by: Satya Priya <quic_c_skakit@xxxxxxxxxxx>
Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
---
Changes in V13:
- None.
Changes in V12:
- None.
Changes in V11:
- Remove intermediate regulators node and add the ldos under
pm8008@8 node.
- change the address cells as 2 for pm8008 parent mfd node.
- add compatible to register the ldos.
- add reg with i2c client offset and address.
arch/arm64/boot/dts/qcom/pm8008.dtsi | 54 ++++++++++++++++++++++++++++++++++++
1 file changed, 54 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/pm8008.dtsi
diff --git a/arch/arm64/boot/dts/qcom/pm8008.dtsi b/arch/arm64/boot/dts/qcom/pm8008.dtsi
new file mode 100644
index 0000000..5606344
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8008.dtsi
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: BSD-3-Clause
+// Copyright (c) 2022, The Linux Foundation. All rights reserved.
+
+&pm8008_bus {
+ pm8008: pmic@8 {
+ compatible = "qcom,pm8008";
+ reg = <0x8>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+
+ pm8008_l1: ldo1@1,4000 {
+ compatible = "qcom,pm8008-regulator";
+ reg = <0x1 0x4000>;
+ regulator-name = "pm8008_ldo1";
+ };
+
+ pm8008_l2: ldo2@1,4100 {
+ compatible = "qcom,pm8008-regulator";
+ reg = <0x1 0x4100>;
+ regulator-name = "pm8008_ldo2";
+ };
+
+ pm8008_l3: ldo3@1,4200 {
+ compatible = "qcom,pm8008-regulator";
+ reg = <0x1 0x4200>;
+ regulator-name = "pm8008_ldo3";
+ };
+
+ pm8008_l4: ldo4@1,4300 {
+ compatible = "qcom,pm8008-regulator";
+ reg = <0x1 0x4300>;
+ regulator-name = "pm8008_ldo4";
+ };
+
+ pm8008_l5: ldo5@1,4400 {
+ compatible = "qcom,pm8008-regulator";
+ reg = <0x1 0x4400>;
+ regulator-name = "pm8008_ldo5";
+ };
+
+ pm8008_l6: ldo6@1,4500 {
+ compatible = "qcom,pm8008-regulator";
+ reg = <0x1 0x4500>;
+ regulator-name = "pm8008_ldo6";
+ };
+
+ pm8008_l7: ldo7@1,4600 {
+ compatible = "qcom,pm8008-regulator";
+ reg = <0x1 0x4600>;
+ regulator-name = "pm8008_ldo7";
+ };
+ };
+};
--
2.7.4
