Re: [PATCH v3 10/15] drivers: clk: qcom: gcc-ipq806x: add additional freq for sdc table

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Ansuel Smith (2022-01-25 13:03:52)
> On Tue, Jan 25, 2022 at 12:45:53PM -0800, Stephen Boyd wrote:
> > Quoting Ansuel Smith (2022-01-21 13:03:35)
> > > Add additional freq supported for the sdc table.
> > > 
> > > Signed-off-by: Ansuel Smith <ansuelsmth@xxxxxxxxx>
> > > ---
> > >  drivers/clk/qcom/gcc-ipq806x.c | 1 +
> > >  1 file changed, 1 insertion(+)
> > > 
> > > diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c
> > > index 77bc3d94f580..dbd61e4844b0 100644
> > > --- a/drivers/clk/qcom/gcc-ipq806x.c
> > > +++ b/drivers/clk/qcom/gcc-ipq806x.c
> > > @@ -1292,6 +1292,7 @@ static const struct freq_tbl clk_tbl_sdc[] = {
> > >         {  20210000, P_PLL8,  1, 1,  19 },
> > >         {  24000000, P_PLL8,  4, 1,   4 },
> > >         {  48000000, P_PLL8,  4, 1,   2 },
> > > +       {  52000000, P_PLL8,  1, 2,  15 }, /* 51.2 Mhz */
> > 
> > Why the comment and fake rate? Can it be 51200000 instead and drop the
> > comment?
> 
> I will add the related reason in the commit.
> 
> We cannot achieve exact 52Mhz(jitter free) clock using PLL8.
> As per the MND calculator the closest possible jitter free clock
> using PLL8 is 51.2Mhz. This patch adds the values, which will provide
> jitter free 51.2Mhz when the requested frequency is 52mhz.

Sounds like this clk should use the round down clk_ops instead of the
round up ones. Then the actual frequency can be in the table.




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux