This is an attempt in making the ipq8064 SoC actually usable. Currently
many feature are missing for this SoC and devs user off-the-tree patches
to make it work (example patch for missing clock, patch for cpufreq
driver, patch to add missing node in the dts)
I notice there was some work in modernizing the gcc driver for other
qcom target but this wasn't done for ipq806x. This does exactly this, we
drop any parent_names stuff and we switch to the parent_data way. We
also drop the pxo and cxo source clk from gcc driver and we refer to the
dts for it.
This also add all the missing feature for the nss cores and the
cryptoengine in them. It does also introduce the required flags to make
the RPM actually work and NOT reject any command. There was an attempt
in declaring these clock as core clock in the dts but this ends up in no
serial as the kernel makes these clock not accessible. We just want to
make the kernel NOT disable them if unused nothing more.
At the end we update the ipq8064 dtsi to add the pxo and cxo tag and
declare them in gcc and also fix a problem with tsens probe.
v3:
- Rework Documentation with Rob suggestions
v2:
- Fix error from Rob bot.
- Add additional commits to make qcom,gcc.yaml a template
- Squash parent_hws patch with the modernize patch
- Create gcc_pxo instead of using long define.
Ansuel Smith (15):
dt-bindings: clock: split qcom,gcc.yaml to common and specific schema
dt-bindings: clock: simplify qcom,gcc-apq8064 Documentation
dt-bindings: clock: Document qcom,gcc-ipq8064 binding
drivers: clk: qcom: gcc-ipq806x: fix wrong naming for
gcc_pxo_pll8_pll0
drivers: clk: qcom: gcc-ipq806x: convert parent_names to parent_data
drivers: clk: qcom: gcc-ipq806x: use ARRAY_SIZE for num_parents
drivers: clk: qcom: gcc-ipq806x: drop hardcoded pxo and cxo source clk
drivers: clk: qcom: gcc-ipq806x: add additional freq nss cores
drivers: clk: qcom: gcc-ipq806x: add unusued flag for critical clock
drivers: clk: qcom: gcc-ipq806x: add additional freq for sdc table
dt-bindings: clock: add ipq8064 ce5 clk define
drivers: clk: qcom: gcc-ipq806x: add CryptoEngine clocks
dt-bindings: reset: add ipq8064 ce5 resets
drivers: clk: qcom: gcc-ipq806x: add CryptoEngine resets
ARM: dts: qcom: Add syscon and cxo/pxo clock to gcc node for ipq8064
.../bindings/clock/qcom,gcc-apq8064.yaml | 29 +-
.../bindings/clock/qcom,gcc-common.yaml | 42 ++
.../bindings/clock/qcom,gcc-ipq8064.yaml | 76 +++
.../devicetree/bindings/clock/qcom,gcc.yaml | 31 +-
arch/arm/boot/dts/qcom-ipq8064.dtsi | 8 +-
drivers/clk/qcom/gcc-ipq806x.c | 638 +++++++++++++-----
include/dt-bindings/clock/qcom,gcc-ipq806x.h | 5 +-
include/dt-bindings/reset/qcom,gcc-ipq806x.h | 5 +
8 files changed, 615 insertions(+), 219 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-common.yaml
create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml
--
2.33.1
