From: Michael Kao <michael.kao@xxxxxxxxxxxx>
Add tboard thermal zones.
The tboard thermal sensors are a kind of NTC sensors which are located
on PCB board to correlate the temperature of the case (Tskin).
pull-up voltage: 1800 mv
pull-up resistor: 75K
Vsense = pull-up voltage * Rntc / ( pull-up resistor + Rntc )
AuxIn = Vsense * 4096 / 1500
Signed-off-by: Michael Kao <michael.kao@xxxxxxxxxxxx>
Signed-off-by: Ben Tseng <ben.tseng@xxxxxxxxxxxx>
Tested-by: Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx>
---
Change in v3:
- Modify Tboard to tbaord in mt8183-kukui.dtsi
- Add more description about tboard thermal sensor
Change in v2:
- Rebase to kernel-v5.13-rc1
- Resend
---
arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 14 ++++++++++++++
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 2 +-
2 files changed, 15 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index ff56bcf..601f866 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -847,6 +847,20 @@
status = "okay";
};
+&thermal_zones {
+ tboard1 {
+ polling-delay = <1000>; /* milliseconds */
+ polling-delay-passive = <0>; /* milliseconds */
+ thermal-sensors = <&tboard_thermistor1>;
+ };
+
+ tboard2 {
+ polling-delay = <1000>; /* milliseconds */
+ polling-delay-passive = <0>; /* milliseconds */
+ thermal-sensors = <&tboard_thermistor2>;
+ };
+};
+
&u3phy {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index c5e822b..4173a5d 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -673,7 +673,7 @@
nvmem-cell-names = "calibration-data";
};
- thermal-zones {
+ thermal_zones: thermal-zones {
cpu_thermal: cpu_thermal {
polling-delay-passive = <100>;
polling-delay = <500>;
--
1.8.1.1.dirty
