Re: [PATCH 4/8] dt-bindings: pinctrl: Add Nuvoton WPCM450

[Linus Walleij <linus.walleij@xxxxxxxxxx>]

Hi Jonathan!

thanks for your patch!

On Wed, Jun 2, 2021 at 2:04 PM Jonathan Neuschäfer
<j.neuschaefer@xxxxxxx> wrote:

> +  interrupts: true

maxitems 4 right?

Make an enum:

interrupts:
  - description: what IRQ0 is for
  - description: what IRQ1 is for
  - description: what IRQ2 is for
  - description: what IRQ3 is for

And describe how these interrupts are used. Because I am suspicious that they
actually correspond to 4 different GPIO blocks, which should then be their own
nodes.

> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/gpio/gpio.h>
> +    pinctrl: pinctrl@b8003000 {
> +      compatible = "nuvoton,wpcm450-pinctrl";
> +      reg = <0xb8003000 0x1000>;
> +      gpio-controller;
> +      #gpio-cells = <2>;
> +      interrupts = <2 IRQ_TYPE_LEVEL_HIGH
> +                    3 IRQ_TYPE_LEVEL_HIGH
> +                    4 IRQ_TYPE_LEVEL_HIGH
> +                    5 IRQ_TYPE_LEVEL_HIGH>;

So these.

> +      rmii2 {
> +        groups = "rmii2";
> +        function = "rmii2";
> +      };
> +
> +      pinctrl_uid: uid {
> +        pins = "gpio14";
> +        input-debounce = <1>;
> +      };

I challenge you here and encourage you to put a node for each
GPIO "port":

  port0: gpio@0 {
 ....
  };
  port1: gpio@1 {
 ....
  };


> +    gpio-keys {
> +      compatible = "gpio-keys";
> +      pinctrl-names = "default";
> +      pinctrl-0 = <&pinctrl_uid>;
> +
> +      uid {
> +        label = "UID";
> +        linux,code = <102>;
> +        gpios = <&pinctrl 14 GPIO_ACTIVE_HIGH>;

Would be gpios <&port0 14...>

Yours,
Linus Walleij