This binding is heavily based on the one for NPCM7xx, because the hardware is similar. One notable difference is that there are no sub-nodes for GPIO banks, because the GPIO registers are arranged differently. Certain pins support blink patterns in hardware. This is currently not modelled in the DT binding. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx> --- .../pinctrl/nuvoton,wpcm450-pinctrl.yaml | 142 ++++++++++++++++++ 1 file changed, 142 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml diff --git a/Documentation/devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml new file mode 100644 index 0000000000000..0664fe2b90db6 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml @@ -0,0 +1,142 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/nuvoton,wpcm450-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton WPCM450 pin control and GPIO + +maintainers: + - Jonathan Neuschäfer <j.neuschaefer@xxxxxxx> + +properties: + compatible: + const: "nuvoton,wpcm450-pinctrl" + + reg: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + interrupts: true + +patternProperties: + # There are two kinds of subnodes: + # 1. a pinmux node configures pin muxing for a group of pins (e.g. rmii2) + # 2. a pinctrl node configures properties of a single pin + "^.*$": + if: + type: object + then: + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# + properties: + groups: + description: + One or more groups of pins to mux to a certain function + minItems: 1 + items: + enum: [ smb3, smb4, smb5, scs1, scs2, scs3, smb0, smb1, smb2, bsp, + hsp1, hsp2, r1err, r1md, rmii2, r2err, r2md, kbcc, dvo, + clko, smi, uinc, gspi, mben, xcs2, xcs1, sdio, sspi, fi0, + fi1, fi2, fi3, fi4, fi5, fi6, fi7, fi8, fi9, fi10, fi11, + fi12, fi13, fi14, fi15, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5, + pwm6, pwm7, hg0, hg1, hg2, hg3, hg4, hg5, hg6, hg7 ] + function: + description: + The function that a group of pins is muxed to + enum: [ smb3, smb4, smb5, scs1, scs2, scs3, smb0, smb1, smb2, bsp, + hsp1, hsp2, r1err, r1md, rmii2, r2err, r2md, kbcc, dvo0, + dvo1, dvo2, dvo3, dvo4, dvo5, dvo6, dvo7, clko, smi, uinc, + gspi, mben, xcs2, xcs1, sdio, sspi, fi0, fi1, fi2, fi3, fi4, + fi5, fi6, fi7, fi8, fi9, fi10, fi11, fi12, fi13, fi14, fi15, + pwm0, pwm1, pwm2, pwm3, pwm4, pwm5, pwm6, pwm7, hg0, hg1, + hg2, hg3, hg4, hg5, hg6, hg7 ] + + pins: + description: + A list of pins to configure in certain ways, such as enabling + debouncing + minItems: 1 + items: + enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7, + gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio14, + gpio15, gpio16, gpio17, gpio18, gpio19, gpio20, gpio21, + gpio22, gpio23, gpio24, gpio25, gpio26, gpio27, gpio28, + gpio29, gpio30, gpio31, gpio32, gpio33, gpio34, gpio35, + gpio36, gpio37, gpio38, gpio39, gpio40, gpio41, gpio42, + gpio43, gpio44, gpio45, gpio46, gpio47, gpio48, gpio49, + gpio50, gpio51, gpio52, gpio53, gpio54, gpio55, gpio56, + gpio57, gpio58, gpio59, gpio60, gpio61, gpio62, gpio63, + gpio64, gpio65, gpio66, gpio67, gpio68, gpio69, gpio70, + gpio71, gpio72, gpio73, gpio74, gpio75, gpio76, gpio77, + gpio78, gpio79, gpio80, gpio81, gpio82, gpio83, gpio84, + gpio85, gpio86, gpio87, gpio88, gpio89, gpio90, gpio91, + gpio92, gpio93, gpio94, gpio95, gpio96, gpio97, gpio98, + gpio99, gpio100, gpio101, gpio102, gpio103, gpio104, + gpio105, gpio106, gpio107, gpio108, gpio109, gpio110, + gpio111, gpio112, gpio113, gpio114, gpio115, gpio116, + gpio117, gpio118, gpio119, gpio120, gpio121, gpio122, + gpio123, gpio124, gpio125, gpio126, gpio127 ] + + input-debounce: true + phandle: true + + dependencies: + groups: [ function ] + function: [ groups ] + + additionalProperties: false + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + pinctrl: pinctrl@b8003000 { + compatible = "nuvoton,wpcm450-pinctrl"; + reg = <0xb8003000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH + 3 IRQ_TYPE_LEVEL_HIGH + 4 IRQ_TYPE_LEVEL_HIGH + 5 IRQ_TYPE_LEVEL_HIGH>; + rmii2 { + groups = "rmii2"; + function = "rmii2"; + }; + + pinctrl_uid: uid { + pins = "gpio14"; + input-debounce = <1>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uid>; + + uid { + label = "UID"; + linux,code = <102>; + gpios = <&pinctrl 14 GPIO_ACTIVE_HIGH>; + }; + }; -- 2.30.2
