On Wed, 2020-03-25 at 17:39 +0100, Matthias Brugger wrote:
>
> On 25/03/2020 10:31, Hanks Chen wrote:
> > this adds initial MT6779 dts settings fo board support,
>
> "for board support"
>
> > including cpu, gic, timer, ccf, pinctrl, uart...etc.
>
> The etc is PMU and PSCI and sysirq, correct? Let's list at least sysirq as this
> is something MediaTek specific.
>
> >
> > Signed-off-by: Hanks Chen <hanks.chen@xxxxxxxxxxxx>
> > ---
> > arch/arm64/boot/dts/mediatek/Makefile | 1 +
> > arch/arm64/boot/dts/mediatek/mt6779-evb.dts | 31 ++++
> > arch/arm64/boot/dts/mediatek/mt6779.dtsi | 265 +++++++++++++++++++++++++++
> > 3 files changed, 297 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/mediatek/mt6779-evb.dts
> > create mode 100644 arch/arm64/boot/dts/mediatek/mt6779.dtsi
> >
> > diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> > index 458bbc4..53f1c61 100644
> > --- a/arch/arm64/boot/dts/mediatek/Makefile
> > +++ b/arch/arm64/boot/dts/mediatek/Makefile
> > @@ -1,6 +1,7 @@
> > # SPDX-License-Identifier: GPL-2.0
> > dtb-$(CONFIG_ARCH_MEDIATEK) += mt2712-evb.dtb
> > dtb-$(CONFIG_ARCH_MEDIATEK) += mt6755-evb.dtb
> > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt6779-evb.dtb
> > dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
> > dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
> > dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
> > diff --git a/arch/arm64/boot/dts/mediatek/mt6779-evb.dts b/arch/arm64/boot/dts/mediatek/mt6779-evb.dts
> > new file mode 100644
> > index 0000000..164f5cb
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/mediatek/mt6779-evb.dts
> > @@ -0,0 +1,31 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Copyright (c) 2019 MediaTek Inc.
> > + * Author: Mars.C <mars.cheng@xxxxxxxxxxxx>
> > + *
> > + */
> > +
> > +/dts-v1/;
> > +#include "mt6779.dtsi"
> > +
> > +/ {
> > + model = "MediaTek MT6779 EVB";
> > + compatible = "mediatek,mt6779-evb", "mediatek,mt6779";
> > +
> > + aliases {
> > + serial0 = &uart0;
> > + };
> > +
> > + memory@40000000 {
> > + device_type = "memory";
> > + reg = <0 0x40000000 0 0x1e800000>;
> > + };
> > +
> > + chosen {
> > + stdout-path = "serial0:921600n8";
> > + };
> > +};
> > +
> > +&uart0 {
> > + status = "okay";
> > +};
> > diff --git a/arch/arm64/boot/dts/mediatek/mt6779.dtsi b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
> > new file mode 100644
> > index 0000000..422ff5f
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
> > @@ -0,0 +1,265 @@
> [...]
> > +
> > + uart_clk: dummy26m {
> > + compatible = "fixed-clock";
> > + clock-frequency = <26000000>;
> > + #clock-cells = <0>;
> > + };
>
> No real clocks for uart? What about CLK_INFRA_UARTx?
sorry, I miss the clocks for uart
I'll add "baud" and "bus" in next version.
clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_UART0>;
clock-names = "baud", "bus";
>
> > +
> > + timer {
> > + compatible = "arm,armv8-timer";
> > + interrupt-parent = <&gic>;
> > + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
> > + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
> > + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
> > + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>;
> > + };
> > +
> > + soc {
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + compatible = "simple-bus";
> > + ranges;
> > +
> [...]
> > +
> > + uart0: serial@11002000 {
> > + compatible = "mediatek,mt6779-uart",
> > + "mediatek,mt6577-uart";
> > + reg = <0 0x11002000 0 0x400>;
> > + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
> > + clocks = <&uart_clk>;
> > + status = "disabled";
> > + };
> > +
> > + uart1: serial@11003000 {
> > + compatible = "mediatek,mt6779-uart",
> > + "mediatek,mt6577-uart";
> > + reg = <0 0x11003000 0 0x400>;
> > + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_LOW>;
> > + clocks = <&uart_clk>;
> > + status = "disabled";
> > + };
>
> SoC has only two UARTs but clock driver has three, how comes?
>
In mt6779 SoC, we have four UARTs.
but we only use UART0 and UART1 as standard serial ports for APMCU.The
others for modem side.
so we add two UARTs in dts.
> > +
> > + audio: clock-controller@11210000 {
> > + compatible = "mediatek,mt6779-audio", "syscon";
> > + reg = <0 0x11210000 0 0x1000>;
> > + #clock-cells = <1>;
> > + };
> > +
> > + mfgcfg: clock-controller@13fbf000 {
> > + compatible = "mediatek,mt6779-mfgcfg", "syscon";
> > + reg = <0 0x13fbf000 0 0x1000>;
> > + #clock-cells = <1>;
> > + };
> > +
> > + mmsys: clock-controller@14000000 {
> > + compatible = "mediatek,mt6779-mmsys", "syscon";
> > + reg = <0 0x14000000 0 0x1000>;
> > + #clock-cells = <1>;
> > + };
>
> Please beware that we are refactoring the mmsys right now. Please use this new
> approach as this will go upstream soon.
>
> https://patchwork.kernel.org/project/linux-mediatek/list/?series=254897
>
Got it, I'll update new approach in next version.
Thanks!
> Regards,
> Matthias
>
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-mediatek
