Re: [PATCH v5 6/6] arm64: dts: add dts nodes for MT6779

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 16/06/2020 15:34, Hanks Chen wrote:
> On Wed, 2020-03-25 at 17:39 +0100, Matthias Brugger wrote:
>>
>> On 25/03/2020 10:31, Hanks Chen wrote:
>>> this adds initial MT6779 dts settings fo board support,
>>
>> "for board support"
>>
>>> including cpu, gic, timer, ccf, pinctrl, uart...etc.
>>
>> The etc is PMU and PSCI and sysirq, correct? Let's list at least sysirq as this
>> is something MediaTek specific.
>>
>>>
>>> Signed-off-by: Hanks Chen <hanks.chen@xxxxxxxxxxxx>
>>> ---
>>>  arch/arm64/boot/dts/mediatek/Makefile       |    1 +
>>>  arch/arm64/boot/dts/mediatek/mt6779-evb.dts |   31 ++++
>>>  arch/arm64/boot/dts/mediatek/mt6779.dtsi    |  265 +++++++++++++++++++++++++++
>>>  3 files changed, 297 insertions(+)
>>>  create mode 100644 arch/arm64/boot/dts/mediatek/mt6779-evb.dts
>>>  create mode 100644 arch/arm64/boot/dts/mediatek/mt6779.dtsi
>>>
>>> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
>>> index 458bbc4..53f1c61 100644
>>> --- a/arch/arm64/boot/dts/mediatek/Makefile
>>> +++ b/arch/arm64/boot/dts/mediatek/Makefile
>>> @@ -1,6 +1,7 @@
>>>  # SPDX-License-Identifier: GPL-2.0
>>>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt2712-evb.dtb
>>>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt6755-evb.dtb
>>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt6779-evb.dtb
>>>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
>>>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
>>>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
>>> diff --git a/arch/arm64/boot/dts/mediatek/mt6779-evb.dts b/arch/arm64/boot/dts/mediatek/mt6779-evb.dts
>>> new file mode 100644
>>> index 0000000..164f5cb
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/mediatek/mt6779-evb.dts
>>> @@ -0,0 +1,31 @@
>>> +// SPDX-License-Identifier: GPL-2.0+
>>> +/*
>>> + * Copyright (c) 2019 MediaTek Inc.
>>> + * Author: Mars.C <mars.cheng@xxxxxxxxxxxx>
>>> + *
>>> + */
>>> +
>>> +/dts-v1/;
>>> +#include "mt6779.dtsi"
>>> +
>>> +/ {
>>> +	model = "MediaTek MT6779 EVB";
>>> +	compatible = "mediatek,mt6779-evb", "mediatek,mt6779";
>>> +
>>> +	aliases {
>>> +		serial0 = &uart0;
>>> +	};
>>> +
>>> +	memory@40000000 {
>>> +		device_type = "memory";
>>> +		reg = <0 0x40000000 0 0x1e800000>;
>>> +	};
>>> +
>>> +	chosen {
>>> +		stdout-path = "serial0:921600n8";
>>> +	};
>>> +};
>>> +
>>> +&uart0 {
>>> +	status = "okay";
>>> +};
>>> diff --git a/arch/arm64/boot/dts/mediatek/mt6779.dtsi b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
>>> new file mode 100644
>>> index 0000000..422ff5f
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
>>> @@ -0,0 +1,265 @@
>> [...]
>>> +
>>> +	uart_clk: dummy26m {
>>> +		compatible = "fixed-clock";
>>> +		clock-frequency = <26000000>;
>>> +		#clock-cells = <0>;
>>> +	};
>>
>> No real clocks for uart? What about CLK_INFRA_UARTx?
> 
> sorry, I miss the clocks for uart
> I'll add "baud" and "bus" in next version.
> 
> clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_UART0>;
> clock-names = "baud", "bus";
> 
> 
>>
>>> +
>>> +	timer {
>>> +		compatible = "arm,armv8-timer";
>>> +		interrupt-parent = <&gic>;
>>> +		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
>>> +			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
>>> +			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
>>> +			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>;
>>> +	};
>>> +
>>> +	soc {
>>> +		#address-cells = <2>;
>>> +		#size-cells = <2>;
>>> +		compatible = "simple-bus";
>>> +		ranges;
>>> +
>> [...]
>>> +
>>> +		uart0: serial@11002000 {
>>> +			compatible = "mediatek,mt6779-uart",
>>> +				     "mediatek,mt6577-uart";
>>> +			reg = <0 0x11002000 0 0x400>;
>>> +			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
>>> +			clocks = <&uart_clk>;
>>> +			status = "disabled";
>>> +		};
>>> +
>>> +		uart1: serial@11003000 {
>>> +			compatible = "mediatek,mt6779-uart",
>>> +				     "mediatek,mt6577-uart";
>>> +			reg = <0 0x11003000 0 0x400>;
>>> +			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_LOW>;
>>> +			clocks = <&uart_clk>;
>>> +			status = "disabled";
>>> +		};
>>
>> SoC has only two UARTs but clock driver has three, how comes?
>>
> 
> In mt6779 SoC, we have four UARTs.
> but we only use UART0 and UART1 as standard serial ports for APMCU.The
> others for modem side.
> so we add two UARTs in dts.
> 

Sorry for the late reply.

DTS describes the HW, so we should add all four to the mt6779.dtsi but only
enable the one that can be used.
BTW I thought modem works through user space application, so why don't you want
to expose them?

Regards,
Matthias

>>> +
>>> +		audio: clock-controller@11210000 {
>>> +			compatible = "mediatek,mt6779-audio", "syscon";
>>> +			reg = <0 0x11210000 0 0x1000>;
>>> +			#clock-cells = <1>;
>>> +		};
>>> +
>>> +		mfgcfg: clock-controller@13fbf000 {
>>> +			compatible = "mediatek,mt6779-mfgcfg", "syscon";
>>> +			reg = <0 0x13fbf000 0 0x1000>;
>>> +			#clock-cells = <1>;
>>> +		};
>>> +
>>> +		mmsys: clock-controller@14000000 {
>>> +			compatible = "mediatek,mt6779-mmsys", "syscon";
>>> +			reg = <0 0x14000000 0 0x1000>;
>>> +			#clock-cells = <1>;
>>> +		};
>>
>> Please beware that we are refactoring the mmsys right now. Please use this new
>> approach as this will go upstream soon.
>>
>> https://patchwork.kernel.org/project/linux-mediatek/list/?series=254897
>>
> Got it, I'll update new approach in next version.
> Thanks!
> 
>> Regards,
>> Matthias
>>
>> _______________________________________________
>> Linux-mediatek mailing list
>> Linux-mediatek@xxxxxxxxxxxxxxxxxxx
>> http://lists.infradead.org/mailman/listinfo/linux-mediatek
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux